Mailing List lml@lancaironline.net Message #42161
From: Gene Martin <genemartin@enid.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Manifold pressure tap on IO320
Date: Wed, 16 May 2007 18:49:02 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
Terrence...I believe any location down stream (after) the throttle plate should give you MP. My front mount sump...not a lycon...was made from a rear mount sump and has a cover plate bolted on in the old location and is open to the plenum. This plate might be a location that could be tapped for MP.
Gene Martin
----- Original Message -----
Sent: Monday, May 07, 2007 12:41 PM
Subject: [LML] Manifold pressure tap on IO320

Posted for "terrence o'neill" <troneill@charter.net>:

Who might have a suggetion for a manifold pressure port, or location for
same, on the Lycoming O-320-B2B, converted to IO. The conversion uses the
priming ports on the cylinders for injection, and the engine oil sump has been
modified by LyCon to a forward mounted injector.
Where should I plug in or tap for manifold pressure?
Thanks,
Terrence
L235/320 N211AL
 

--

For archives and unsub http://mail.lancaironline.net:81/lists/lml/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster