Mailing List lml@lancaironline.net Message #41108
From: <MikeEasley@aol.com>
Sender: <marv@lancaironline.net>
Subject: Re: [LML] Bulkhead Fitting Challenge
Date: Wed, 04 Apr 2007 11:53:28 -0400
To: <lml@lancaironline.net>
 Message Header

Undecoded Message
John,
 
I think a large radius bend in the aluminum tubing is preferable to any tight 90 degree fitting.  Tim Ong told me that the 90 degree fittings are fairly restrictive.
 
Mike Easley
Colorado Springs
 



See what's free at AOL.com.
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster