|
|
Posted for "Farnsworth" <farnsworth@charter.net>:
At Reno I run at 2900 RPM. MP is 60" plus. However, in order to use that
much MP, I spray distilled water on the cylinders, pump a lot of ADI and use
160 octane fuel.
The fuel pump is standard. During daily operation I operate with the waste
gate controller set to minimum. At Reno the waste gate is set to a much
higher level. I'm not sure what the maximum MP it will produce is, but, 75"
of MP should be obtainable.
"""
It depends on the manifold pressure, of course, but 70 GPH is common.
OH! I didn't know that was possible.
Is that a stock pump?
How much MP/RPM?
"""
|
|