I would like to relocate this servo to just an inch ahead of the right aileron torque box . the question is to all that have installed this hi torque servo as the arm has 2 pick-points on it and I do prefer the inner one- is that a problem for the throw  of the arm or has this worked well in the past . The reason for this question is for 2 reasons .  1 is this inner location required or used and 2 the clearance is better with the servo 1/2” closer to the insider wall to clear the inner side wall and the right front seat I know these are stepper motors but the throw  of the arm and end point definitions are a mystery are they adjustable in the digital program btw I called true track and asked about the lack of hardware  and they said it should by included I received the rod ends but no 10-32 screws and the bushing for the rudder really not sure what they go to for it doesn’t work with my hidden rudder system  Bill Maddox 509-932-4445  billmaddox@speedbrakes.com