Sender: <marv@lancaironline.net>
To: lml
Date: Sun, 31 Dec 2006 11:23:29 -0500
Message-ID: <redirect-1727205@logan.com>
Received-SPF: none
 receiver=logan.com; client-ip=206.246.194.60; envelope-from=rpastusek@htii.com
From: "Robert R Pastusek" <rpastusek@htii.com>
Subject: TSIO 550 Engine Mounts
MIME-Version: 1.0
Content-Type: text/plain;
	charset="us-ascii"
Content-Transfer-Encoding: 7bit
Importance: Normal
In-Reply-To: <list-1724843@logan.com>

Gentlemen,

I am finally ready to mount the engine to my IV-P and need some information.
I chose (at least so far) to build up and configure the Performance
Engines-overhauled engine myself, and therefore need lots of bits and
pieces. Based on the excellent baffles they provided on Jim White's (Lancair
built-up) engine, I bought the baffle kit from Kit Components, but have been
reluctant to buy the "hose kit" and other items as my firewall-forward
configuration is just a bit different, and I've heard that some of the
Lancair-provided components don't fit/don't work as intended.

The first thing I need is a set of Lord engine isolators. I called Lord for
assistance and Paul Snyder there was most helpful, but we were not able to
positively confirm the correct isolators for this engine/mount
configuration. Do any of you have the Lord part number(s), or perhaps a good
source? (Lord doesn't sell direct, but would be happy to provide through one
of their distributors once we can determine the correct unit(s).

Many Thanks in advance!

Bob Pastusek
N437RP at about 90%--with ?? to go!