|
|
I have the VM1000 with the EC100 and it's been working great. Recently
though I did need to replace the fuel pressure sensor and the oil
temperature sensor. Both parts were readily available and shipped very
quickly. The fuel xducer was a little pricey I thought at about $245, but
the oil temp was only $115.
that's my experience with it.
Steve Rosenzweig
LNC360 N171DK
Lancaster CA
----- Original Message ----- From: "Lancair" <lancair@aon.at>
To: <lml>
Sent: Wednesday, December 06, 2006 7:01 AM
Subject: [LML] VisionMicrosystems
Hello Everybody
A few days before I asked you if someone knows what the matter is with
VisionMicrosystems. The same question I asked Joe Bartels at Lancair where
I have bougth the VM1000, EC100 and the Fuel Level System. From his staff
member Lisa Williams I received the following information. Has anybody got
any comment to it??
It's a matter of fact that I now have an EC100 (Elektronic Checklist) as
well as a Fuel Level System which are both UNWORKABLE. I'm really anxious
to know if I'll get back the 825.-- $ which I have paid for that junk.
And I also
wonder what will happen when I need a new sensor for the VM1000 one day
............
Ronald Heidegger
============================================================================
Mr. Heidegger
Below is the information from Vision:
Ok according to Ottis at Vision Microsystems, They no longer have a person
that can burn the chips
for the fuel level calibration instrument, nor will they in the distant
future, so his solution is to pull out the instrument and toss it and buy
the Electronics International instrument FL-2CA and that is a dual fuel
level instrument, cost is $469.00 which can be programmed with liters on
it, unfortunately Vision is not offering any compensation for the part
that they can't program.
Let me know if you have any questions regarding the above, and if I can
help you with ordering the instrument from Electronics International.
Lisa
Lisa M. Williams
Purchasing
Kit Components Inc.
Lancair Avionics
2244 Airport Way
Redmond, OR 97756
541-923-2244 x149
lisaw@lancair.com
--
For archives and unsub http://mail.lancaironline.net/lists/lml/
|
|