lml@lancaironline.net Mailing List Archive

<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Curtis Krouse wrote: > <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> > << Lancair Builders' Mail List >> > <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> > >> > The white tileboard is the same stuff I'm using on my bench......it's > everything that Bill said. But, I think the best thing is that it seems to be > a perfect surface to use the "pizza cutter" on. > Curtis N753K> > >I covered mine > > with several layers of cheap white tileboard from Home Depot (about 8 > > bucks for a 4x8 sheet). Its smooth and nonporous. It wipes clean with> > > Bill Harrelson > > N38BH -----------------------------------------------------------> I used a fiberglass impregnated (??) type flexible (thin) board bought at Home Depot. $26.00 for a 4 X 8 sheet. It is used in bathrooms and is textured on one side, smooth as a babies but on the other (smooth side up!). Works like a charm and NO RESIDUE when cutting eglass with the pizza cutter. Looks like one sheet on my cutting table and lay up tables will probably last the entire project. MEC and Acetone work well to cleat it. Brent Sanchez - IV-P Starting hydraulic system >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html Builders' Bookstore: http://www.buildersbooks.com/lancair >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>