Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5.2) with ESMTP id 1021242 for rob@logan.com; Wed, 09 Jan 2002 01:44:48 -0500 Received: from orngca-mls03.socal.rr.com ([66.75.160.18]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Mon, 7 Jan 2002 01:29:04 -0500 Received: from walter (bak-24-161-199-34.bak.rr.com [24.161.199.34]) by orngca-mls03.socal.rr.com (8.11.4/8.11.4) with SMTP id g076UHi28842 for ; Sun, 6 Jan 2002 22:30:17 -0800 (PST) Message-ID: <003001c19745$7f9e4160$22c7a118@bak.rr.com> From: "Walter Dodson" To: "LancairList" Subject: IV-P flaps 30 micro sw for AOA Date: Sun, 6 Jan 2002 22:35:28 -0800 MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Does anyone out there know how to rig a micro switch to indicate from flaps 30 to full down? The Frantz AOA system needs an input from flaps 30 to full flaps and I don't have a clue how to configure a switch to do that without squashing the darn thing. The best I can figure is to mount it on the gear box beam next to the flap cylinder very near the hinge. Sensitivity there must be tough. Any ideas appreciated. Surely, this has been done over and over by all you talented folks... Thanks in advance, Walter Dodson IV-P 75% plus or minus a year >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://members.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please remember that purchases from the Builders' Bookstore assist with the management of the LML. Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>