Return-Path: Received: from mail2.svr.pol.co.uk ([195.92.193.210]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Sat, 2 Oct 1999 16:59:36 -0400 Received: from [195.92.197.25] (helo=mail17.svr.pol.co.uk) by mail2.svr.pol.co.uk with esmtp (Exim 2.12 #2) id 11XWJc-0001nx-00 for lancair.list@olsusa.com; Sat, 2 Oct 1999 22:03:36 +0100 Received: from modem-72.doctor.dialup.pol.co.uk ([62.136.111.200] helo=default) by mail17.svr.pol.co.uk with smtp (Exim 2.12 #2) id 11XWHy-0007NE-00 for lancair.list@olsusa.com; Sat, 2 Oct 1999 22:01:54 +0100 Message-ID: <000a01bf0d19$488ff280$c86f883e@default> From: "Dr Michael A Fopp" To: "Lancair List" Subject: Jeffco Mixing ratio Date: Sat, 2 Oct 1999 22:00:47 +0100 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> Dear All, I'm now at the stage of finishing off the repairs to G-FOPP following my = nose leg problem. The original work was done with the Shell/Teta mix = with occasional uses of Safe-T-Poxy when there was a risk of exotherm = reactions. I now have a brand new bottle of Jeffco and need to know the ratio for = mixing. I no longer have a serviceable ration dispenser so would be = grateful for any info on weighing the ration or (even better) the = dimensions of a ratio balance. I have used a balance for Safe-T-Poxy as = per Burt Rutan's excellent instructions so I am quite comfortable with = this method. Anyway, can any of you 'Jeffco experts' help a poor Brit. in trouble = please? Just in passing I can highly recommend the longer engine mount as far as = accessibility is concerned. I had my CSU off and on about ten times the = other day - try that with the short mount!! All the best, Michael -- >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/Users/Mkaye/maillist.html