Return-Path: Received: from smtp3.erols.com ([207.172.3.236]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Thu, 12 Aug 1999 08:01:13 -0400 Received: from default (207-172-110-130.s130.tnt1.frd.va.dialup.rcn.com [207.172.110.130]) by smtp3.erols.com (8.8.8/8.8.5) with SMTP id IAA00403 for ; Thu, 12 Aug 1999 08:04:41 -0400 (EDT) Message-ID: <37B2B96D.6F51@erols.com> Date: Thu, 12 Aug 1999 08:09:17 -0400 From: BILL and SUE Reply-To: harrelson@erols.com To: lancair.list@olsusa.com Subject: LNC2 flap pushrods References: <19990812043512.AAA26870@truman.olsusa.com> X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> > Is it just my immagination or is it impossible to remove these pushrods once > you have permanently bonded the center console in place? I have planned to > make my center console partially removable. Angier, Yes, the pushrods can be made removable but, at least on my installation, not with the console cutout shown on the plans. I just kept opening up the cutout on one side a little at a time until I could just remove the longest pushrod. If you do this, there is probably no need to make the console even partially removable. Bill Harrelson N38BH harrelson@erols.com >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML homepage: http://www.olsusa.com/Users/Mkaye/maillist.html