Posted for "Jim Nordin" <panelmaker@earthlink.net>:

 In my opinion, take out what’s wrong, and do it right by the plans before
 you close the wings. Mine works perfectly and it only takes a little care in
 putting it together. So it’s a little work but you’ll know what to expect
 from a plans setup.  Minimize the experimentation!
 
 Jim

"""
 Hi, I'm the third owner and am discovering a few things as I get ready to
 close the wings.  I matched one of the Aileron Pushrod Tube's placement
 identical to the first wing (2nd owner) assuming it was in the right
 position.  Now, I've discovered that each wing has a slight rub/interference
 through it's travel (Did a good job of matching them ;-) .  It's not much,
 but it is unacceptable.  An 1/8" is all I would need to clear the tube.  So,
 the question is:
"""