From: "Marvin Kaye" <marv@lancaironline.net>
Subject: Re: [LML] Tin Foil EMI Resistent Hats for Avionics?
To: lml
Date: Fri, 27 May 2005 01:00:18 -0400
Message-ID: <web-964959@logan.com>
In-Reply-To: <5A74D671233E6F4D94F5BC3239FB91D301FB21BF@edith.ad.twtelecom.com>
References: <5A74D671233E6F4D94F5BC3239FB91D301FB21BF@edith.ad.twtelecom.com>
MIME-Version: 1.0
Content-Type: text/plain; charset="ISO-8859-1"; format="flowed"
Content-Transfer-Encoding: 8bit

Posted for "Schroeder, Jared" <Jared.Schroeder@twtelecom.com>:

  
  Working at a phone company we run across all kinds of strange stuff but
  Scott's email is probably the most bazaar by far..
  
  But if your interested in checking the SAR Specific Absorption Rate of
  your cell phone you can go here...
  
  Information on SAR for a specific phone model can be obtained for many
  recently manufactured phones using the FCC identification (ID) number
  for that model. The FCC ID number is usually printed somewhere on the
  case of the phone. Sometimes it may be necessary to remove the battery
  pack to find the number. Once you have the ID number, go to the
  following Web address: www.fcc.gov/oet/fccid. On this page, you will see
  instructions for entering the FCC ID number. Type the FCC ID number
  exactly as requested (the Grantee Code is the first three characters,
  the Equipment Product Code is the rest of the FCC ID number). Then click
  on "Start Search." The "Grant of Equipment Authorization" for your
  telephone should appear. Read through the grant for the section on "SAR
  Compliance," "Certification of Compliance with FCC Rules for RF
  Exposure" or similar language. This section should contain the value(s)
  for typical or maximum SAR for your phone.
  
  It might pass the time reading.. Oh and Scott make sure you put some
  foam under the foil for comfort...
  
  J Schroeder
  Office: 888-245-0608 x1861
Fax: 303-566-1861
  
  I am as bad as the worst, but, thank God, I am as good as the best.
  If you done it, it ain't bragging.