Return-Path: Received: from mail3.centuryinter.net ([209.142.136.99]) by truman.olsusa.com (Post.Office MTA v3.5.1 release 219 ID# 0-52269U2500L250S0V35) with ESMTP id com for ; Wed, 30 Jun 1999 14:22:05 -0400 Received: from pavilion (ppp017.pa.centuryinter.net [209.142.129.159]) by mail3.centuryinter.net (8.9.3/8.9.3) with SMTP id NAA21084 for ; Wed, 30 Jun 1999 13:24:37 -0500 (CDT) Message-ID: <001a01bec325$d37c5660$bb818ed1@pavilion> From: "J. N. Cameron" To: "Lancair List" Subject: Radio noise Date: Wed, 30 Jun 1999 13:22:12 -0500 X-Mailing-List: lancair.list@olsusa.com Mime-Version: 1.0 <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> My ES still has an unacceptable level of radio noise when transmitting on either COM. For a while, I had convinced myself that some of it was static buildup, due to my still flying in primer [the DuPont Corlar primer will make your hair stand up when you rub it down]. Now, however, with a pretty, new paint job, I still have the problem. This is after having my audio panel (PMA6000M) exchanged for one with the latest grounding and other mods. I also ripped out lots of wiring, re-routing things to get COM antenna leads far away from everything else, did some extra grounding and shielding, etc., etc. At this point I think I've left my envelope of expertise, and need some professional help in tracking down the source of the noise, and a fix for same. I'm located in South Texas (2R8, near Corpus Christi). Does anyone out there have an avioniker that is good at tracking these things down? I get the feeling that the fellow I've used in the past is brushing me off a bit because I didn't buy my radios from him. The Lancair shop only wants to work on new installations that they build up. Those attitudes are understandable, I guess, but I'm willing to pay going rates for the expertise I need. I think composites have some problems different from spam cans, but what it really needs is someone with a nose for diagnosing problems. At this point I don't know if the noise originates in the radios (Terra), the panel, the panel harness, RF pickup directly from the COM antennas into wiring, or ..... ? Any names or leads would be much appreciated. You might just e-mail me directly, rather than posting them here on LML. Thanks in advance for anyone that can help. Jim Cameron, LNCE N82500 >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML homepage: http://www.olsusa.com/Users/Mkaye/maillist.html