|
|
Mike or Ron Raby -
We have an engine direct from the factory that has a hall effect sensor on the right mag. Do you still have the pinouts for that? We need to have it to pipe to the Blue Mountain EFIS.
Thanks,
John
On Tue, 02 Nov 2004 14:20:51 -0500, Ron Raby <ronr@advanceddesign.com> wrote:
Mike
The sensor that is allready on the mag works fine? That will make it easy. do you remember the color code or which wires you matched up to the sensor?
Thanks
Ron
----- Original Message -----
From: MikeEasley@aol.com
To: Lancair Mailing List
Sent: Tuesday, November 02, 2004 1:32 PM
Subject: [LML] Re: Mag removal
Ron,
I installed a JPI EDM900. It came with a mag sensor for the tach. It looked a lot like the one that came on my factory reman IO550N. I talked to JPI and they told me to just cut off the round black connector and don't bother removing the mag to install the sensor that came with my JPI unit. I installed a 3 pin molex and never touched the mag.
Mike
--
|
|