Peter,
thank you for your information.  I know the KLN 89B has not ARINC output,but
I would like to know if RS 232 signal is sufficient to feed the GPSS. At
this day I didn't get any answer,even from BendixKing.
By the way,should you know if the P 891 # 6 pin can be used to transmit a
signal to an autopilot (it is labelled"Spare RS 232 output) or if I can feed
a KMD 250 AND a Trutrak autopilot  (both) from the P 891 #2,labelled
"General RS 232 Output" ?
Many thanks.
Alain NOIREAUX  L 320  F-PSDV
----- Original Message -----
From: "Marvin Kaye" <marv@lancaironline.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Thursday, October 21, 2004 5:22 PM
Subject: [LML] Re: KLN 89B Outputs


> Posted for Peter.Sokolowski@t-online.de (Peter Sokolowski):
>
>   Hello Alain,
>   I also have the KLN 89B, and as far i can remember, the unit does not
> produce
> the ARINC output, which is required for the GPSS functionality. I will
check
> again, but I already discussed the subect with TruTrak and they gave me a
> negative answer.
>
>   Best regards
>   Peter (360, 45%, rebuilding engine)
>
>
>
> --
> For archives and unsub http://mail.lancaironline.net/lists/lml/
>