Sender: <marv@lancaironline.net> (Marvin Kaye)
To: lml@lancaironline.net
Date: Fri, 30 Jul 2004 09:07:55 -0400
Message-ID: <redirect-339353@logan.com>
Received-SPF: pass
 receiver=logan.com; client-ip=194.158.96.107; envelope-from=alainoireaux@club-internet.fr
Reply-To: "Alain NOIREAUX" <alainoireaux@club-internet.fr>
From: "Alain NOIREAUX" <alainoireaux@club-internet.fr>
References: <list-338983@logan.com>
Subject: Re: [LML] Re: LMC2 Canopy Installation or Removal
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

I did it the same way to remove  my canopy from my LNC2 and found it the
eysiest way to do it,but it is true that you need two helpers to hold the
canopy and I think it is impossible to do such a work alone.
Alain NOIREAUX    L-320  F-PSDV
----- Original Message ----- 
From: "Bill&Sue" <5zq@cox.net>
To: "Lancair Mailing List" <lml@lancaironline.net>
Sent: Friday, July 30, 2004 4:33 AM
Subject: [LML] Re: LMC2 Canopy Installation or Removal


>
>
> >     To LNC2 owners with the forward hinged canopy  --  How do you remove
> > or reinstall it?
>
>
>
> It's probably a little easier to leave the hinge pivot bolts in and remove
> the bolts at the canopy attach point. I've done it both ways and it's not
> too bad as long as you have some help. You'll need to be inside the
cockpit
> while two helpers hold the canopy from either side.
>
> Bill Harrelson
> N5ZQ   320   800 hrs
> N6ZQ    IV    0.001%
> 5zq@cox.net
>
>
> --
> For archives and unsub http://mail.lancaironline.net/lists/lml/
>