Posted for "Jim Nordin" <panelmaker@earthlink.net>:

No direct experience with an O-360 (if that's what it is) in a L235 but
judging how much room there is with the little O-235 ... it'l be a very
tight fit if at all. There have been plenty folks mounting a '320, in case
it's a 180hp! (My hangar mate has a L235 so I have good access to measure
things.)

The nose of the 235 sits mighty close to the ground for a big blade
requirement and a lot more weight if it's an O-360. Also the engine mount
might be a real challenge. Much bigger exhaust needs too. Being there's a
lot more weight on the nose gear might be a concern. Sure would be a
challenge.

That rascal should climb if possible tho'.

What kind of 180?

jim (panelmaker@earthlink.net)