|
|
In a message dated 3/26/2003 11:36:29 AM Central Standard Time, rsmiley@centurytel.net writes:
Safty wired the regulator and buttoned up the operation. If
memory serves me correct, I think I turned the screw about two turns.
Identifying leaks are your first task. adjustment is the second. I am under
the impression that pumps either work or they fail. Any one else have
experience on slow failures
Bob,
Never a slow failure.
You are right, I also had to adjust the regulator and I also do not remember which way I made the adjustment although usually, righty-tighty so I probably lefty-loosey. Also, on my requlator, the adjustment is held in place by bendable tabs which you must bend up to rotate and then bend the appropriate two tabs to capture the setting.
Scott Krueger
Sky2high@aol.com
LNC2 N92EX IO320 Aurora, IL (KARR)
|
|