Return-Path: Sender: (Marvin Kaye) To: lml Date: Tue, 03 Dec 2002 23:27:40 -0500 Message-ID: X-Original-Return-Path: Received: from sccrmhc02.attbi.com ([204.127.202.62] verified) by logan.com (CommuniGate Pro SMTP 4.0.2) with ESMTP id 1894073 for lml@lancaironline.net; Tue, 03 Dec 2002 22:34:37 -0500 Received: from pavilion (12-252-55-158.client.attbi.com[12.252.55.158]) by sccrmhc02.attbi.com (sccrmhc02) with SMTP id <2002120403343700200355dfe>; Wed, 4 Dec 2002 03:34:37 +0000 From: "Dan & Kari Olsen" X-Original-To: Subject: Plumbing the AOA Pro X-Original-Date: Tue, 3 Dec 2002 20:34:30 -0700 X-Original-Message-ID: <000201c29b46$11846320$6401a8c0@pavilion> MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_0003_01C29B0B.65258B20" X-Priority: 3 (Normal) X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook, Build 10.0.3416 Importance: Normal X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2600.0000 This is a multi-part message in MIME format. ------=_NextPart_000_0003_01C29B0B.65258B20 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Greetings, I just installed the pitot/static lines in my 320 and am trying to add Jim Frantz's AOA Pro. The problem I am running into is that the "T" fittings that Jim provides are for 1/4" NylaFlo tubing and I am using 3/16" NylaFlo. The "T" fitting is used to tap into both the pitot and static lines and has a barbed nipple for the thin spaghetti tubing that runs to the AOA computer. The nipple is threaded 10-32. So, I thought I would just use a brass Poly-Flo "T" fitting and tap one of the ends for the 10-32. No such luck! The ID of the 264P-03 is exactly 3/16" (to accommodate the NylaFlo tube, of course). I e-mailed Jim and he does not have any fittings off the shelf that will work for my application. So, what to do? Has anyone out there used the AOA with 3/16" NylaFlo? If so, what was your solution to tap into the pitot and static lines? Thanks! Dan Olsen 320 MKII Fort Collins, CO ------=_NextPart_000_0003_01C29B0B.65258B20 Content-Type: text/html; charset="us-ascii" Content-Transfer-Encoding: quoted-printable

Greetings,

I just installed the pitot/static lines in my 320 and = am trying to add Jim Frantz’s AOA Pro. The problem I am running = into is that the “T” fittings that Jim provides are for 1/4" = NylaFlo tubing and I am using 3/16” NylaFlo. The “T” = fitting is used to tap into both the pitot and static lines and has a barbed nipple = for the thin spaghetti tubing that runs to the AOA computer. The = nipple is threaded 10-32. So, I thought I would just use a brass Poly-Flo = “T” fitting and tap one of the ends for the 10-32. No such luck! = The ID of the 264P-03 is exactly 3/16” (to accommodate the NylaFlo tube, = of course).

I e-mailed Jim and he does not have any fittings off = the shelf that will work for my application.

So, what to do? Has anyone out there used the = AOA with 3/16” NylaFlo? If so, what was your solution to tap into the = pitot and static lines?

Thanks!

Dan Olsen

320 MKII

Fort Collins, CO

------=_NextPart_000_0003_01C29B0B.65258B20--