Return-Path: Sender: (Marvin Kaye) To: lml Date: Thu, 28 Nov 2002 11:46:12 -0500 Message-ID: X-Original-Return-Path: Received: from imo-d09.mx.aol.com ([205.188.157.41] verified) by logan.com (CommuniGate Pro SMTP 4.0.2) with ESMTP id 1890644 for lml@lancaironline.net; Thu, 28 Nov 2002 11:38:42 -0500 Received: from Newlan2dl@aol.com by imo-d09.mx.aol.com (mail_out_v34.13.) id q.199.1155bb67 (3996) for ; Thu, 28 Nov 2002 11:38:37 -0500 (EST) From: Newlan2dl@aol.com X-Original-Message-ID: <199.1155bb67.2b17a08c@aol.com> X-Original-Date: Thu, 28 Nov 2002 11:38:36 EST Subject: Re: [LML] Re: LNC4 windshield trimming X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: AOL 7.0 for Windows US sub 10637 Micah has a good point about the abrasive blades on a sabre saw (they are essential for composite work) but I also have some for my band saw. Also available from Remington "Remgrit" blades. One last thing. Another respondent talked about drilling holes in Plexiglas and if you do ever drill holes in Plexi, be sure to use bits made for plastic! They have a different pitch and don't tend to stress the plastic as much which can prevent crazing around the holes...not that you'd want to drill holes in the windshield anyway. Dan Newland