Return-Path: Sender: (Marvin Kaye) To: lml Date: Thu, 28 Nov 2002 11:46:12 -0500 Message-ID: X-Original-Return-Path: Received: from imo-m08.mx.aol.com ([64.12.136.163] verified) by logan.com (CommuniGate Pro SMTP 4.0.2) with ESMTP id 1890647 for lml@lancaironline.net; Thu, 28 Nov 2002 11:44:22 -0500 Received: from Newlan2dl@aol.com by imo-m08.mx.aol.com (mail_out_v34.13.) id q.de.3107ac82 (3996) for ; Thu, 28 Nov 2002 11:44:16 -0500 (EST) From: Newlan2dl@aol.com X-Original-Message-ID: X-Original-Date: Thu, 28 Nov 2002 11:44:16 EST Subject: Re: [LML] Legacy cowling--inside finish X-Original-To: lml@lancaironline.net MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 7bit X-Mailer: AOL 7.0 for Windows US sub 10637 Hi Wendel It would probably work but it would be pretty heavy. Why not just glaze on a light coating of epoxy/microballoons/cabosil, lightly sand and spray? It will look better and be a lot lighter in weight. The HDT will be exceeded but since it's non-structural, who cares? The resin isn't damaged. Or you can get some high temp epoxy if you like. I use a LOT of epoxy and am a composites designer. I use a brand from Applied Poleramic in Benicia, Ca. Sorry, I'm at home and don't have the number but it's in the 925 area code. Dan Newland Super ES