Sender: <marv@lancaironline.net> (Marvin Kaye)
To: lml
Date: Wed, 06 Nov 2002 08:40:03 -0500
Message-ID: <redirect-1854283@logan.com>
From: Hamid Wasti <hwasti@starband.net>
User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; en-US; rv:1.0.1) Gecko/20020823 Netscape/7.0
MIME-Version: 1.0
Subject: Re: [LML] Re: Lancair IV project
References: <list-1853914@logan.com>
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hello Shane,

Contrary to your situation were an addition to the family has increased 
the seating requirements for your stead, a reduction in family (divorce) 
has reduced the requirements for mine.  Consequently, I am planning to 
sell my IV project.  It is a very early IV (non pressurized) from when 
the molds were still fresh and the parts fit together without much 
shaping or sanding.  I have the complete kit (what used to be called the 
A, B and C kits).  The wings are closed.  All the fuselage bulkheads and 
the firewall are installed.  The wings, HS and gear box are NOT fitted 
to the fuselage, but I have talked to the factory about them doing this 
on the factory jig through the builder assist program and they do not 
have a problem with doing it.  After having that done you will be a bit 
ahead of the latest super ultra extra fast build after it goes through 
the Lancair factory builder assist program.  At that point you are 
looking at doing all the system work and the finishing.

The kit is currently stored in northern CA, just a 6 hour drive from the 
Lancair factory and can fit in the back of a U-Haul.

I see from your e-mail address that you are located somewhere in Canada. 
 What part of Canada?  I am current in Canada myself, visiting my folks 
in the Toronto area.  If you would like to talk more about the kit, you 
are welcome to call me on my cell phone at 208-699-4424.

Regards,

Hamid

> Posted for Shane Daly <f4u5n@shaw.ca>:
> Hello all,
>
> I am new to the list. I am currently involved in a Lancair 320 project 
> and am thoroughly enjoying it. I would however, like to get into a IV 
> as my family is taking on a new member. Does anyone on the list know 
> of or have a IV project they would be interested in selling? I plan to 
> finish the 320, but I am looking towards the future and the IV would 
> be a better choice for a growing family.
>
> Thanks,
>
> Shane Daly
> f4u5n@shaw.ca