|
|
Angier,
I've included my right side horizontal tail access. The theme on my
plane is too close tolerances. I have to use some pretty creative tools
to torque the elevator pushrod connections. This is my first attempt at
sending digital shots. I have more if these don't induce too much dial
up agony or you desire to see the left side.
My left side access hole has the 1/2" wide com attenna conveniently
running smack dab through the middle of the hole. I real bleeder when
assembling and disassembling.
I enjoyed bending that little close out piece of al. It was my first
attempt at shaping metal.
>>On the subject of the HS...when it comes time to prime and paint, is
it best to remove the elevator hinges prior to paint or not?
I took my hinges off just to keep'm pretty. I then put a small piece of
tape over each of the holes to keep primer and gook away form the
nutplates. I didn't touch the tape till the final coat was completed.
I felt it cosmetically irrelavent.
Larry Henney
360LH
PS: Wife is beginning to consider letting me go to the Lancair BBQ.
Being from TX, I have to ask.... Is it good BBQ?
|
|