Mailing List lml@lancaironline.net Message #13622
From: <Sky2high@aol.com>
Sender: Marvin Kaye <marv@lancaironline.net>
Subject: Re: [LML] LN-2 Exhaust Piping clearance
Date: Thu, 30 May 2002 16:30:03 -0400
To: <lml>
1.  Screw and silicon left-over stainless steel firewall material to the
fuselage.  Maybe put some spare fiberfrax under the SS.

2.  Construct stainless steel "shield" with tabs at each end and use hose
clamps to hold it on the exhaust pipe.

3.  Find out why there isn't enough air leaving the cowling to avoid this or
whether this happens only on the ground from radiant heat.  Anyway, try #1

Scott Krueger
LNC2 320 N92EX, Only have seen 235's from a distance.
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster