<<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>
         <<  Lancair Builders' Mail List  >>
         <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>>

Bill,
If you are talking about the mac servo wire the Ray Allen Co. recommends (believe it are not) a Radio Shack 5 pin mini DIN plug. This is what's on there web site, hope it's what you're looking for. The plug is small enough to fit through a 1/2 inch hole:

"We like solderable connectors because of the small 26 gage wires we work with. Radio Shack has a small round Mini DIN connector (part no. 274-006A (M) and 274-003A (F)). Surprisingly, this connector is not available through their web site last time I checked, but it is in their catalog. When we use this connector, we don't use the included strain relief caps. The connector can be made much smaller by just using shrink tubing over the leads."

Ron Laughlin
Legacy 156

LML website:   http://members.olsusa.com/mkaye/maillist.html
LML Builders' Bookstore:   http://www.buildersbooks.com/lancair
Please remember that purchases from the Builders' Bookstore
assist with the management of the LML.

Please send your photos and drawings to marvkaye@olsusa.com.