Return-Path: Received: from pop3.olsusa.com ([63.150.212.2] verified) by logan.com (CommuniGate Pro SMTP 3.5b3) with ESMTP id 869973 for rob@logan.com; Mon, 24 Sep 2001 12:45:32 -0400 Received: from hotmail.com ([216.33.241.25]) by pop3.olsusa.com (Post.Office MTA v3.5.3 release 223 ID# 0-71866U8000L800S0V35) with ESMTP id com for ; Mon, 24 Sep 2001 10:48:07 -0400 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Mon, 24 Sep 2001 07:59:33 -0700 Received: from 4.3.234.148 by lw8fd.law8.hotmail.msn.com with HTTP; Mon, 24 Sep 2001 14:59:33 GMT From: "Bill Kennedy" To: lancair.list@olsusa.com Bcc: Subject: Re: MK2 fast-build- Mac servo trim on rudder Date: Mon, 24 Sep 2001 14:59:33 +0000 Mime-Version: 1.0 Content-Type: text/plain; format=flowed Message-ID: X-Mailing-List: lancair.list@olsusa.com Reply-To: lancair.list@olsusa.com <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> << Lancair Builders' Mail List >> <<<<<<<<<<<<<<<<--->>>>>>>>>>>>>>>> >> I'm not sure what 'peening' really is but I just did some 1 1/4" control rods this weekend so I had to make a quess. I held the manufactured head against an anvil and formed the shop head with a hammer. The rivets were one size to large which is usually bad news with a squeezer or rivet gun, but worked very well with the hammer....Good luck!...Bill >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> LML website: http://www.olsusa.com/mkaye/maillist.html LML Builders' Bookstore: http://www.buildersbooks.com/lancair Please send your photos and drawings to marvkaye@olsusa.com. >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>