Return-Path: Sender: (Marvin Kaye) To: flyrotary Date: Sun, 23 Feb 2003 00:28:27 -0500 Message-ID: X-Original-Return-Path: Received: from [65.54.169.121] (HELO hotmail.com) by logan.com (CommuniGate Pro SMTP 4.0.6) with ESMTP id 2034452 for flyrotary@lancaironline.net; Sat, 22 Feb 2003 21:21:36 -0500 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Sat, 22 Feb 2003 18:21:35 -0800 X-Originating-IP: [65.137.51.131] Reply-To: "Tracy Crook" From: "Tracy Crook" X-Original-To: "Rotary motors in aircraft" References: Subject: Re: [FlyRotary] Re: gascolator woes X-Original-Date: Sat, 22 Feb 2003 21:21:12 -0500 Organization: Real World Solutions Inc. MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: 7bit X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1106 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1106 X-Original-Message-ID: X-OriginalArrivalTime: 23 Feb 2003 02:21:35.0710 (UTC) FILETIME=[49E677E0:01C2DAE2] Original Message: ----------------- From: Marvin Kaye marv@lancaironline.net Date: Fri, 21 Feb 2003 11:23:24 -0500 To: flyrotary@lancaironline.net Subject: [FlyRotary] Re: gascolator woes Posted for "Ed Anderson" : Whew! Glad to hear you got back to Shady Bend OK, otherwise who would finish my RD1-B {:>). Nice to have two fuel pumps. I notice that Van's no longer recommends using the white "Slosh" compound for sealing the fuel tanks, just Proseal. I used the Slosh compound and thus far have had not problems(knock on wood), but then I don't have as many hours flying on the airframe. However, I will check my corse filter today. Thanks for the tip. Ed Lots of alternate strips! Sounds like wonderland. What was the fiberous stuff in the filter Tracy? I used yellow 'Slosh' in my tanks. OK so far. I have two transparent automotive filters before the high presure pumps, they get checked in the DI. Hope you injury is healing well. Ian RV6A Australia. Thanks Ed & Ian. I don't know where the fiberous stuff comes from. I'm very careful to keep my jerry cans that I transport fuel in sealed & clean although I don't use a filtered funnel when transfering fuel to the plane. The fibers are very tiny (takes a magnifying glass to make out the fibers) and I have seen them accumulate in every filter screen on every airplane I've owned. For all I know it may be in the gas (or oil?) when I buy it. Keep in mind that the stuff shown in the photo I sent was accumulated over about 18 months (shame on me!) and represented the residue from almost 2000 gallons of gasoline and 16 gallons of two stroke oil. The elbow is healing nicely and is doing much better than the early prognosis indicated. Tracy