Message-ID: <002401c4654b$ab094300$2402a8c0@EDWARD>
From: "Ed Anderson" <eanderson@carolina.rr.com>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
References: <list-251303@logan.com>
Subject: Re: [FlyRotary] Re: LS1 Coils and Harness II
Date: Thu, 8 Jul 2004 20:28:33 -0400
MIME-Version: 1.0
Content-Type: text/plain;
	charset="iso-8859-1"
Content-Transfer-Encoding: 7bit

Not to worry, Ron.

    Tracy does have an LS1 coil wiring diagram.  Its not difficult at all
and I am certain that if you sent him  a SASE envelop he would be happy to
mail you a copy.  The EC2 for the LS1 is slightly different than that for
the Mazda stock coils, so they are not directly interchangeable.  So, make
certain when you order your EC2 that you specify it is for LS1 coils.

Do you have a fax number? I could try an fax you the sheet that has the LS1
wiring diagram or you can get it from Tracy.

Ed

Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message ----- 
From: "Ron Milligan" <ronmilligan@cox.net>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Thursday, July 08, 2004 7:36 PM
Subject: [FlyRotary] Re: LS1 Coils and Harness II


> Ed,
>
> Just got all of my parts in the mail except the pins.  Thanks again for
> doing all the research.  But now I realize I have no idea how to wire
them!
> If Tracy's EC2 covers it great please disregard (will order it in the
> future).  If he doesn't please help me out one more time.  What do the 4
> wires on the coil go to?  Speaking of which, Tracy will send out the
> instructions for the EC2 if you mail him a SASE.  Anybody have it in
> electronic form?  Tracy?
>
> Thanks
>
> Ron Milligan
> RV7 QB Fuse
> Aliso Viejo CA
>
>
> -----Original Message-----
> From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]On
> Behalf Of Ed Anderson
> Sent: Thursday, June 24, 2004 6:30 PM
> To: Rotary motors in aircraft
> Subject: [FlyRotary] Re: LS1 Coils and Harness II
>
>
> Hi Ken
>
>   The vendor is a WAYTEK, Inc.  The plugs are Packard-Delphi Metri-pack
> 150 series.  If you go to their web site and enter their part numbers
> (below) it will bring up the item and a page with photos of the items.
The
> pins were the only thing I did not receive (they are back-ordered) so
can't
> show you any yet.
>
> URL is http://www.waytekwire.com/
>
> Let me know if you have any further questions
>
> Ed
>
> Ed Anderson
> RV-6A N494BW Rotary Powered
> Matthews, NC
>
>
> 38207 METRI-PACK 150 SERIES 4 PIN (the Plug housing)
>
>  39006 PACKARD CABLE SEAL-DARK RED (small red seals that seals the
> individual wire)
>
> 31077 METRI-PACK 150 SERIES (This is the terminals I haven't received yet)
>
> 38208 METRI-PACK 150 SERIES 4 PIN (This is a tension reliever and clamp
that
> seals the pins in the housing.
>
> 422 PED ALL PURPOSE REMOVAL TOOL (This was a pin removal tool that I
though
> was cheap enough to buy it)
>
>
> There is a minimum order for all items like around $5.00.  So you end up
> with something like 51 terminal pins when you only need 16.
>
> Just to repeat, this is for the 2004 Corvette 5.7L 350 CID engine and its
> LS1 coil that carries AC Delco Part number D580 and GM part number
12558948.
>
>
>
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html
>