Hi Ed,
I have alsmost made the decision to switch to the LS1 coils - two last questions:
1.  How much do the LS1 coils weigh?  I think the Mazda coils weigh a total of  9 lbs but those notes are at home so I'm not certain of this number.
2.  How many amps will the LS1 coils pull while in flight (Tracy???)?  Seems that I remember that the Mazda leading coils pull 7 - 8 amps.  It doesn't seem that there would be much of a difference but I can always hope for less!

Ken Powell


> Hi Ken
>
>   The vendor is a WAYTEK, Inc.  The plugs are Packard-Delphi Metri-pack
> 150 series.  If you go to their web site and enter their part numbers
> (below) it will bring up the item and a page with photos of the items.  The
> pins were the only thing I did not receive (they are back-ordered) so can't
> show you any yet.
>
> URL is http://www.waytekwire.com/
>
> Let me know if you have any further questions
>
> Ed
>
> Ed Anderson
> RV-6A N494BW Rotary Powered
> Matthews, NC
>
>
> 38207 METRI-PACK 150 SERIES 4 PIN (the Plug housing)
>
>  39006 PACKARD CABLE SEAL-DARK RED (small red seals that seals the
> individual wire)
>
> 31077 METRI-PACK 150 SERIES (This is the terminals I haven't received yet)
>
> 38208 METRI-PACK 150 SERIES 4 PIN (This is a tension reliever and clamp that
> seals the pins in the housing.
>
> 422 PED ALL PURPOSE REMOVAL TOOL (This was a pin removal tool that I though
> was cheap enough to buy it)
>
>
> There is a minimum order for all items like around $5.00.  So you end up
> with something like 51 terminal pins when you only need 16.
>
> Just to repeat, this is for the 2004 Corvette 5.7L 350 CID engine and its
> LS1 coil that carries AC Delco Part number D580 and GM part number 12558948.
>
>
>
>
>
>
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html