|
|
------ Forwarded Message
From: ACRE <rotaryeng@earthlink.net>
Organization: ACRE
Date: Fri, 25 Jun 2004 00:20:57 -0700
Subject: Custom cowl R us
If anybody did not get a cowl with their kit or you want a custom cowl
let me know. I am getting better at lofting cowls.
I need a 2D drawing of the firewall, the distance from the firewall to
the prop flange, the position of the thrust line and all the stuff
that will be in the cowl. I can then do a custom cowl to fit everything
inside which will save you a year. You will have template patterns
you can cut out, mount and then fill the spaces with foam to make a male
buck. Which can then be used to make a female mold.
It is much less work if you have a stock AC cowl and just need to fit the
engine
and rads inside. Usually less than an optimum solution for the rotary but it
saves
a lot of work.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://home.earthlink.net/~rotaryeng/
Copyright 1998-2004 All world wide rights reserved.
------ End of Forwarded Message
|
|