|
|
Hi Guys,
Attached are some shots of the rear housings of the REW, Renesis, and a
Cosmo rear housings.
As far as I'm aware, the Cosmo 20Bs only ever came out in auto config
(that's what I've been told). The starter motor was on the left side of the
engine. The low power auto Renesis has the same (similar) set-up.
You will note that the Renesis auto housing has provision for mounting from
below similar to the REW (but not drilled and tapped). NOT so with the
Cosmo (not shown).
Cheers,
Leon
----- Original Message -----
From: "Jarrett Johnson" <jjjohnson@accesscomm.ca>
To: "Rotary motors in aircraft" <flyrotary@lancaironline.net>
Sent: Wednesday, April 28, 2004 4:31 AM
Subject: [FlyRotary] Re: 20B
> Wondering if some of you more knowledgeable gent's [ at least more
> knowledgeable than little ol' me] can tell me if there is a difference
> between the auto and manual 20b's? It would seem that it matters in the
> 13b's and Renisis engines.. and I'm just wondering if it matters in the 3
> rotors..
>
> Jarrett Johnson
>
>
> >> Homepage: http://www.flyrotary.com/
> >> Archive: http://lancaironline.net/lists/flyrotary/List.html
|
|