X-Junk-Score: 0 [] X-KAS-Score: 0 [] From: "David COOK hoursaway1@comcast.net" Received: from pmg.Logan.com ([207.170.160.161] verified) by logan.com (CommuniGate Pro SMTP 6.4.0) with ESMTPS id 3771852 for flyrotary@lancaironline.net; Wed, 01 Jan 2025 12:30:53 -0500 Received: from pmg.Logan.com (localhost [127.0.0.1]) by pmg.Logan.com (Proxmox) with ESMTP id 7695432870 for ; Wed, 1 Jan 2025 12:30:53 -0500 (EST) Received-SPF: pass (comcast.net: 96.103.146.62 is authorized to use 'hoursaway1@comcast.net' in 'mfrom' identity (mechanism 'ip4:96.103.146.48/28' matched)) receiver=pmg.Logan.com; identity=mailfrom; envelope-from="hoursaway1@comcast.net"; helo=resdmta-a2p-641405.sys.comcast.net; client-ip=96.103.146.62 Received: from resdmta-a2p-641405.sys.comcast.net (resdmta-a2p-641405.sys.comcast.net [96.103.146.62]) by pmg.Logan.com (Proxmox) with ESMTPS for ; Wed, 1 Jan 2025 12:30:52 -0500 (EST) Received: from resomta-a2p-647653.sys.comcast.net ([96.103.145.229]) (using TLSv1.3 with cipher TLS_AES_256_GCM_SHA384 256/256 bits) (Client did not present a certificate) by resdmta-a2p-641405.sys.comcast.net with ESMTPS id T1qhtw3xjbyPyT2YPtN2H2; Wed, 01 Jan 2025 17:30:45 +0000 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=comcast.net; s=20190202a; t=1735752645; bh=VRQg5xe+97+xMC9+Nkc/+eve8KlL0DsrYs4x8sCk0nU=; h=Received:Received:Date:From:To:Message-ID:Subject:MIME-Version: Content-Type:Xfinity-Spam-Result; b=i3Reh/RaG5vdf6zzPfTQpZt+5carrtnfdnNeEFCwoJJF9M5vdF732eX1mC6cLQBS4 LONAVq5mxI0IqTbnhUaN4IzgZuFafeXMV/9YE5iKhakZ5RblyAtCMvm2L3hhRTCRTX BO6r/ZfSH9RwobO/4UZB9Xao27VEaQJKzrFRtvYxLrToHwsxjcsqHsHIO3Mkjnc8lT JE1/hM0tbCFQ/gBhHUOVz5vqEEu0D4dkvOUSGHt1/49EzWnuj1vP5amESMb/Nul3Zi XEWKzqwVNEwaOMu+rGX5fjTE86iX/OAy5tLaKdzD8cx+qKKd/2M9qUqDkD6uNv7pEB hJWZphXlXGcAQ== Received: from oxapp-ch2f-19o.email.comcast.net ([96.117.80.250]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 256/256 bits) (Client did not present a certificate) by resomta-a2p-647653.sys.comcast.net with ESMTPS id T2YOtdwNf9hTTT2YOtzYoz; Wed, 01 Jan 2025 17:30:45 +0000 Date: Wed, 1 Jan 2025 12:30:44 -0500 (EST) To: Rotary motors in aircraft Message-ID: <1922588200.952039.1735752644493@connect.xfinity.com> In-Reply-To: References: Subject: Re: [FlyRotary] Re: EM2 MAP Lookup Table no MP displayed? MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_Part_952038_599301303.1735752644464" X-Priority: 3 Importance: Normal X-Mailer: Open-Xchange Mailer v7.10.6-Rev59 X-Originating-IP: 2601:405:4980:5fe0:4464:1e46:12a4:663e X-Originating-Client: open-xchange-appsuite X-CMAE-Envelope: MS4xfO+rlgZmHqG0+SKva4f5km7xLZo7jtsiyvQQZTZprIHjiMjbhsyIkZ0aMgl+1BQSRtBUgs0YCFt+mf0FR/m0rf695Wm5OFXeyzePPLoeZHI20FhRwnL+ ibzm6hJ2klh6UzQyL68bpKRMUoYlUTwv29UcoupxCG26tnCnXiTQ5PrV5sch25zPpS6EsyIbNonSkw1cPp6RzEfX3TOmu76S8WgtZG+MBP9yfYPh4C88g+Uh X-SPAM-LEVEL: Spam detection results: 0 AWL 0.363 Adjusted score from AWL reputation of From: address BAYES_00 -1.9 Bayes spam probability is 0 to 1% DKIM_SIGNED 0.1 Message has a DKIM or DK signature, not necessarily valid DKIM_VALID -0.1 Message has at least one valid DKIM or DK signature DKIM_VALID_AU -0.1 Message has a valid DKIM or DK signature from author's domain DKIM_VALID_EF -0.1 Message has a valid DKIM or DK signature from envelope-from domain DMARC_PASS -0.1 DMARC pass policy FREEMAIL_ENVFROM_END_DIGIT 0.25 Envelope-from freemail username ends in digit FREEMAIL_FROM 0.001 Sender email is commonly abused enduser mail provider FREEMAIL_REPLY 1 From and body contain different freemails HTML_MESSAGE 0.001 HTML included in message SPF_HELO_NONE 0.001 SPF: HELO does not publish an SPF Record SPF_PASS -0.001 SPF: sender matches SPF record ------=_Part_952038_599301303.1735752644464 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Another note I found was to take all vacuum lines from as far away from eng= . as possible, I used the dynamic chamber for vacuum lines, gives smooth re= sponse instead of bouncy readings from eng. pulses.=20 > On 12/30/2024 12:48 PM EST Doug Lomheim rv9flyer13b@gmail.com wrote: > =20 > =20 > David: According to the EM2 manual (v. 2007, pg 20), When the engine is = running, the two lower values are =E2=80=9Cthe ones currently being used by= the EC2 to control the engine=E2=80=9D. The engine was running when I sna= pped the photo, but the MP reading of 28.8 didn=E2=80=99t change with throt= tle position changes, and the mixture was ultra rich (took full lean to run= ). I found a 1 inch tear in the brand new vacuum line (I had installed las= t week), that took manifold pressure to the fuel regulator and also onto th= e EC2. It was interesting to me that the engine would still run even with = a massive leak in one of the vacuum lines feeding the EC2. =20 > =20 > Doug=20 > =20 > =20 > =20 > =20 > Is the 28.8 figure, MAP in a diff. location because you are in mapping fe= ature. > =20 > David Cook > =20 >=20 >=20 > > =20 > > =20 > > =20 > > Read the manuals! =F0=9F=99=82 > >=20 > > Vague recollection that it was disabled. Don't remember why. Something = to do with changes to use RPM instead of MAP under certain operating condit= ions? > >=20 > > Finn > >=20 > > On 12/29/2024 6:50 PM, DOUGLAS LOMHEIM dlomheim@aol.com mailto:dlomheim= @aol.com wrote: > >=20 > > > Does anyone know why my EM2 doesn=E2=80=99t display an associated MP = reading with associated table location? > > >=20 > > > The EM2 in my 9A does display the associated MP value=E2=80=A6 > > > Thx > > >=20 > > > Doug > > >=20 > >=20 >=20 ------=_Part_952038_599301303.1735752644464 MIME-Version: 1.0 Content-Type: text/html; charset=UTF-8 Content-Transfer-Encoding: quoted-printable =20 =20
Another note I = found was to take all vacuum lines from as far away from eng. as possible, = I used the dynamic chamber for vacuum lines, gives smooth response instead = of bouncy readings from eng. pulses. 
=20
=20
On 12/30/2024 12:48 PM EST Doug Lomheim rv9flyer13b@gmail.com <flyro= tary@lancaironline.net> wrote:
=20
 
=20
 
=20
David:  According to the EM2 manual (v. 2007, pg 20= ), When the engine is running, the two lower values are =E2=80=9Cthe o= nes currently being used by the EC2 to control the engine=E2=80=9D.  T= he engine was running when I snapped the photo, but the MP reading of 28.8 = didn=E2=80=99t change with throttle position changes, and the mix= ture was ultra rich (took full lean to run).  I found a 1 inch tear in= the brand new vacuum line (I had installed last week), that took manifold = pressure to the fuel regulator and also onto the EC2.  It was int= eresting to me that the engine would still run even with a massive leak in = one of the vacuum lines feeding the EC2.  
=20
 
=20
Doug 
=20
 
=20
 
=20
 =
=20
 =
Is the 28.8 figure, MAP in a diff. location because y= ou are in mapping feature.=20
 
=20
David Cook
=20
 
=20

=20
=20
=20
 
=20
=20
=20
 
=20
 
Read the manuals! =F0=9F=99=82
<= br class=3D"" style=3D"caret-color: #444444; color: #444444; font-family: m= onospace;">Vague recollection that= it was disabled. Don't remember why. Something to do with changes to use R= PM instead of MAP under certain operating conditions?
Finn
On 12/29/2024 6:50 PM, D= OUGLAS LOMHEIM dlomheim@aol.= com wrote:
=20
Does anyone know why my = EM2 doesn=E2=80=99t display an associated MP reading with associated table = location?

The EM2 in my 9A does display the as= sociated MP value=E2=80=A6
Thx

D= oug
=20
=20
=20
=20
=20
=20
------=_Part_952038_599301303.1735752644464--