|
|
From EM2 manual:
P2-7 OAT White wire (RWS) CH 11 +2V sensor output (white wire)
P2-21 White w/black stripe or Brown OAT sensor bias
P2-21 is basically ground for the OAT sensor.
On 8/6/2024 1:59 PM, Finn Lassen finn.lassen@verizon.net wrote:
Ground for OAT probe/sensor requires special connection. Surely that's covered in the manual?
Finn
On 8/6/2024 9:09 AM, DOUGLAS LOMHEIM dlomheim@aol.com wrote:
Group: My temp readouts seem to be reasonable so far except the OAT (+\- 64), so was wondering if any have seen this before?
Also on the main screen I noticed next to EGT bar graphs a single digit (instructions say that’s the highest temp rotor), but mine displays a “3” once in a while, so it appears mine was programmed as a 3 rotor vs. “2”?
Doug
Sent from my iPhone
-- Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
-- Homepage: http://www.flyrotary.com/
Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
|
|