Mailing List flyrotary@lancaironline.net Message #67512
From: Charlie England ceengland7@gmail.com <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: Potential alternate solutions for oil cooling and oil filter mount
Date: Thu, 19 Oct 2023 14:36:21 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sorry for the late reply; been a bit distracted the last few days. I really don't know about the continuous thing, but that particular item was for a US-brand vehicle, and 'word on the street' about engine testing at major car mfgrs these days is that it's far more abusive than anything we could likely achieve in a/c. One test (just one of many) that's been mentioned is running for hundreds of hours, alternating between max power and max torque, stopping only for oil changes at the 'book' interval.

Charlie

Of course, dumping that oil heat load into the water means a significantly bigger water radiator would be required. 

On Mon, Oct 16, 2023 at 1:39 PM Finn Lassen finn.lassen@verizon.net <flyrotary@lancaironline.net> wrote:
How much heat ( % ) of total is normally rejected for a piston engine?
You say rated for 280HP. Is that 280HP continuous?

Finn

On 10/15/2023 4:55 PM, Charlie England ceengland7@gmail.com wrote:
> I've been interested in the idea of liquid-liquid oil coolers for a
> long time, but haven't been willing to pay the rather high prices for
> 'conventional' solutions. In recent years quite a few cars have
> started using oil/water exchangers, and I've bookmarked several that
> look like they have potential in both heat handling and adaptability. 
> This one looks like it might be as easy as any to adapt, and it
> includes a filter mount, to boot. It's used on vehicles with around
> 280 HP, so it might be able to handle a 13B/Renesis' heat load (with
> larger radiator, of course). Looks like it could mount to an adapter
> made from flat aluminum plate with the exception of one port.
>
> Might have potential to eliminate a cooling duct, and get rid of the
> topside bump of the filter on the older Renesis blocks.
>
> https://www.amazon.com/dp/B0BY82QT7J
>
> Charlie
>


--
Homepage:  http://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster