| Hi Doug
The heater return on the Renesis is from memory into the manifold that feeds water to the pump inlet. This manifold has the following inputs: a. Cooled water from the radiator b. Water used to warm the throttle body c. Heater return
Cheers
Steve Izett Glasair Super IIRG, Renesis 4 Port, RD1C, MTV-7C, EC2/EM3
On 7 Jul 2023, at 10:15 am, Doug Lomheim rv9flyer13b@gmail.com <flyrotary@lancaironline.net> wrote:
Greetings: One more silly question as I attempt to plan out my water and oil runs…
The water for the heater core I know comes out of the block underneath the oil filter pad, but is there a consensus on where it’s best to return it to? I hate to “assume” anything on this installation, but if I did I’d imagine I should be able to return it to the radiator by Teeing it into another line already heading there, etc.
Is that what you all have done?
Thanks!
Doug
RV-9A / 86 Mazda 13B / FWF
|