Mailing List flyrotary@lancaironline.net Message #67298
From: Mark McClure mark.mcclure.m3@gmail.com <flyrotary@lancaironline.net>
Subject: Resurrecting my project
Date: Mon, 29 Aug 2022 11:45:06 -0400
To: <Flyrotary@lancaironline.net>
So after a few years hiatus of working on the project, I am back at it.
Glasair Super 2 with 4 port RENESIS.

Feels good, except I cannot remember all of my plans, nor some of the decisions I made. 2 sets of bell mouths for the intake, obviously one was first… and one was “decided on”

I purchased my EC-3 back in 2012. I believe at the time I asked Tracy for RENESIS engine with stock injectors and LS1 coils. Searching through the archives, it seems Finn Lassen found that the EC3 is not programmed correctly to represent that? Or maybe I misread it.

All my electronic pieces are still unopened and no work has really been started on installing any of it. I am working on getting all the ancillary systems such as intake, exhaust, oil and cooling setup. 

So a few questions for the group:
1) ditch the EC3 and EM3 altogether (and provide it to someone else as a backup) Start acquiring/learning SpeedUino or some other system?
2) continue with what I have (is there some way to validate or change the programming of the EC3?)
3) unrelated: Anyone made the swap to yellow and blue injectors for RENESIS and are happy with their decision? Or stick with red and blue?

Appreciate any insights from others' experiences as I get back at this. 

Warm regards,
Mark McClure

60% Glasair Super 2TD
35% 13b
Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster