X-Virus-Scanned: clean according to Sophos on Logan.com From: Received: from omr-a003e.mx.aol.com ([204.29.186.57] verified) by logan.com (CommuniGate Pro SMTP 6.1.5) with ESMTPS id 7967845 for flyrotary@lancaironline.net; Sat, 05 Sep 2015 10:28:47 -0400 Received-SPF: pass receiver=logan.com; client-ip=204.29.186.57; envelope-from=argoldman@aol.com Received: from mtaomg-laa02.mx.aol.com (mtaomg-laa02.mx.aol.com [172.27.2.100]) by omr-a003e.mx.aol.com (Outbound Mail Relay) with ESMTP id 4C4E23800056 for ; Sat, 5 Sep 2015 10:28:12 -0400 (EDT) Received: from core-aba02e.mail.aol.com (core-aba02.mail.aol.com [172.27.22.2]) by mtaomg-laa02.mx.aol.com (OMAG/Core Interface) with ESMTP id 15B5C38000085 for ; Sat, 5 Sep 2015 10:28:12 -0400 (EDT) Received: from 67.167.236.80 by webprd-a63.mail.aol.com (10.72.57.74) with HTTP (WebMailUI); Sat, 05 Sep 2015 10:28:11 -0400 Date: Sat, 5 Sep 2015 10:28:11 -0400 To: flyrotary@lancaironline.net Message-Id: <14f9de84f21-8ca-1cb0d@webprd-a63.mail.aol.com> In-Reply-To: References: Subject: Re: [FlyRotary] Re: redrive question MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_Part_140689_650438661.1441463291678" X-MB-Message-Source: WebUI X-MB-Message-Type: User X-Mailer: JAS STD X-Originating-IP: [67.167.236.80] x-aol-global-disposition: G DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=mx.aol.com; s=20150623; t=1441463292; bh=JDMBMmrlDyj+6vDZh7tY2ShPzOxs91aaXLFnpFF52tE=; h=From:To:Subject:Message-Id:Date:MIME-Version:Content-Type; b=Azf0Q8CC3e1i4Zyxkjc7QT1uJRbvxAIRWuYA0KIULvHQOq7Yi4zOjNt39RAI8WzYK o8Ftf7DGUC1YAIXIqQhXh5Xyu1gNUA9A7YlGrBLm57R+Zyo5kUgQ/RH+VpunvbC+8a zK0gjFB6jFh9fo7+wV+YwbjSvgu7jz2jXlrqstjo= x-aol-sid: 3039ac1b026455eafbfc0fe2 ------=_Part_140689_650438661.1441463291678 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: quoted-printable Thanks, Bill, that was my thought also. I was just grasping at straws, hoping somebody wo= uld have the measurements. Thanks again Rich =20 =20 =20 -----Original Message----- From: Bill Bradburry To: Rotary motors in aircraft Sent: Sat, Sep 5, 2015 8:13 am Subject: [FlyRotary] Re: redrive question =20 =20 Rich, =20 =20 =20 I think the only one who would have that measurement is whoever has the pla= ns for the PSRU. You will probably have to measure your PSRU in order to g= et the measurements. The other possibility is that whoever built that plan= e in one of Bobby=E2=80=99s pictures. I don=E2=80=99t know whose plane it = is, but I suspect it is either Bobby=E2=80=99s or Mark Steitle=E2=80=99s. = They probably just made the plate to fit and don=E2=80=99t have the measur= ements. =20 =20 =20 Bill=20 =20 =20 =20 =20 =20 =20 =20 From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]=20 Sent: Friday, September 04, 2015 10:47 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: redrive question =20 =20 =20 =20 =20 Thanks, Bill =20 =20 =20 =20 =20 =20 =20 Almost =20 =20 =20 =20 =20 =20 =20 In Tracy's prsu, the forward oil seal is in a circular aluminum piece which= is attached to the prsu by several Allen bolts which are arranged in group= s of two. What I was looking for is the diameter of the bolt circle and the= spacing of those bolts=20 =20 =20 =20 =20 =20 =20 =20 My bracket will be a flat steel plate affixed to the front of this plate us= ing 3 of the bolts. The brush/rpm sensor will be connected through an ear o= n this plate =20 =20 =20 =20 =20 =20 =20 Thanks, =20 =20 =20 =20 =20 =20 =20 Rich =20 =20 =20 Sent from my iPhone =20 =20 =20 On Sep 4, 2015, at 8:44 PM, Bill Bradburry w= rote: =20 =20 =20 =20 Rich, =20 If I understand what you are asking, I think Tracy=E2=80=99s PSRU has a SAE= 2 flange. The dimensions are in this gif. =20 =20 =20 http://acsproducts.co/wp-content/uploads/2013/07/as127.gif =20 =20 =20 =20 =20 Bill=20 =20 =20 =20 =20 =20 =20 =20 From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net]=20 Sent: Friday, September 04, 2015 6:29 PM To: Rotary motors in aircraft Subject: [FlyRotary] Re: redrive question =20 =20 =20 =20 =20 Thanks bobby, =20 =20 =20 =20 =20 =20 =20 I have already designed the mounting plate =20 =20 =20 =20 =20 =20 =20 All I really need is the spacing of the bolts so I can make the fixture bef= ore I disassemble the prsu =20 =20 =20 =20 =20 =20 =20 Rich =20 Sent from my iPhone =20 =20 =20 On Sep 4, 2015, at 12:42 PM, Bobby J. Hughes = wrote: =20 =20 =20 =20 =20 Two examples for MT props. =20 =20 =20 =20 http://www.trv7.com/2009/RotorFest09/RotorFest09-91.jpg =20 =20 =20 http://www.trv7.com/2009/RotorFest09/RotorFest09-82.jpg =20 =20 =20 =20 =20 =20 =20 Bobby =20 =20 =20 Sent from my iPad =20 =20 =20 On Sep 4, 2015, at 11:34 AM, A R Goldman wro= te: =20 =20 =20 =20 Greetings gentle people, =20 Does any body have a diagram (and measurements) for the bolt pattern of th= e front plate of Tracy's rd1-c prsu =20 I want to make a bracket to hold a ivo brush assembly. =20 Thanks in advance =20 Rich Sent from my iPhone =20 =20 -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List= .html =20 =20 =20 =20 =20 =20 =20 =20 ------=_Part_140689_650438661.1441463291678 Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: quoted-printable Thanks, Bi= ll,

that was my thought also. I was just grasping at straws, hoping somebody wo= uld have the measurements.

Thanks again

Rich



-----= Original Message-----
From: Bill Bradburry <flyrotary@lancaironline.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Sent: Sat, Sep 5, 2015 8:13 am
Subject: [FlyRotary] Re: redrive question

=20 =20
=20 =20
Rich,
=20 =20
 
=20 =20
I think the only one who would have th= at measurement is whoever has the plans for the PSRU.  You will probab= ly have to measure your PSRU in order to get the measurements.  The ot= her possibility is that whoever built that plane in one of Bobby=E2=80=99s = pictures.  I don=E2=80=99t know whose plane it is, but I suspect it is= either Bobby=E2=80=99s or Mark Steitle=E2=80=99s.   They probabl= y just made the plate to fit and don=E2=80=99t have the measurements.
=20 =20
 
=20 =20
Bill
=20 =20
 
=20 =20
=20 =20
=20
=20 =20
From: Rota= ry motors in aircraft [mail= to:flyrotary@lancaironline.net]
Sent: Friday, September 04,= 2015 10:47 PM
To: Rotary motors in aircra= ft
Subject: [FlyRotary] Re: re= drive question
=20
=20 =20
 
=20 =20
=20 =20
Thanks, Bill
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
Almost
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
In Tracy's prsu, the forward oil seal is in a circular aluminum pie= ce which is attached to the prsu by several Allen bolts which are arranged = in groups of two. What I was looking for is the diameter of the bolt circle= and the spacing of those bolts 
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
My bracket will be a flat steel plate affixed to the front of this = plate using 3 of the bolts. The brush/rpm sensor will be connected through = an ear on this plate
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
Thanks,
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
Rich
=20
=20 =20
=20 =20

Sent from my iPhone
=20
=20 =20
=20 =20

On Sep 4, 2015, at 8:44 PM, Bill Bradburry <flyrotary@lancaironline.net>= wrote:
=20
=20
=20 =20
=20 =20
Rich,
=20 =20
If I understand what you are asking, I= think Tracy=E2=80=99s PSRU has a SAE 2 flange.  The dimensions are in= this gif.
=20 =20
 
=20 =20 =20 =20
 
=20 =20
 
=20 =20
Bill
=20 =20
 
=20 =20
=20 =20
=20
=20 =20
From: Rota= ry motors in aircraft [mailto:flyrotary@lancaironline.net]
Sent: Friday, September 04,= 2015 6:29 PM
To: Rotary motors in aircra= ft
Subject: [FlyRotary] Re: re= drive question
=20
=20 =20
 
=20 =20
=20 =20
Thanks bobby,
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
I have already designed the mounting plate
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
All I really need is the spacing of the bolts so I can make the fix= ture before I disassemble the prsu
=20
=20 =20
=20 =20
 
=20
=20 =20
=20 =20
Rich

Sent from my iPhone
=20
=20 =20
=20 =20

On Sep 4, 2015, at 12:42 PM, Bobby J. Hughes <flyrotary@lancaironline.net>= wrote:
=20
=20
=20 =20
=20 =20
=20 =20
Two examples for MT props.  
=20
=20 =20 =20 =20 =20 =20
=20 =20
 
=20
=20 =20
=20 =20
Bobby
=20
=20 =20
=20 =20

Sent from my iPad
=20
=20 =20
=20
=20 =20
=20 =20

Greetings gentle people,

Does any body have a diagram (and measurements) for the bolt pattern of th= e front plate of Tracy's rd1-c prsu

I want to make a bracket to hold a ivo brush assembly.

Thanks in advance

Rich
Sent from my iPhone


--
Homepage:  ht= tp://www.flyrotary.com/
Archive and UnSub:   http://mail.lancaironline.net= :81/lists/flyrotary/List.html
=20
=20
=20
=20
=20
=20
=20
=20
------=_Part_140689_650438661.1441463291678--