User-Agent: Microsoft-Entourage/10.1.4.030702.0
Date: Wed, 03 Mar 2004 08:32:07 -0500
Subject: Re: [FlyRotary] Re: 13B smooth running issues
From: Bulent Aliev <atlasyts@bellsouth.net>
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Message-ID: <BC6B4887.9ED0%atlasyts@bellsouth.net>
In-Reply-To: <list-3060641@logan.com>
Mime-version: 1.0
Content-type: text/plain; charset="US-ASCII"
Content-transfer-encoding: 7bit

On 3/3/04 8:12 AM, "John Slade" <sladerj@bellsouth.net> wrote:

>> I purchased a 5/8 heater nipple from
>> CarQuest that had a 1/2"NPT fitting...
> We must be talking about different holes. This one's almost 1/8 NPT, but the
> same theory should apply.
> 
> By the way - I discovered an "interesting" failure mode yesterday....
> 
> I took her out for her first taxi test. First impression was that the engine
> was running MUCH smoother with the prop in place. Still rich, but much more
> responsive. There was a metallic noise I hadn't heard before, so I swung her
> around and taxied straight back. As I shut her down I noticed a prop
> vibration that didnt seem right.
> 
> There was a LOT of lag on the prop. Buly peered down into the flywheel area
> and spotted a bolt lying at the bottom of the case, just waiting for the
> best opportunity to jump up and attack the expensive and really important
> piece of wood right behind the redrive. :(
> 
> Wiggling the prop a bit more I noticed that the flywheel was moving a little
> with respect to  the counterweights behind it. I removed the redrive. The
> entire damper plate / flywheel assembly was loose. I removed the damper
> plate and found, behind it, the 6 small bolts and one very large central
> bolt that hold the flywheel in place were all loose. I said 6. Actually
> there were 5. The other one, the one Buly found, had already come out. This
> situation could have taken a very serious bite out of my ass if the
> remaining bolts had come out during the first flight. Can you say
> "catastrophic failure"?
> 
> I know what happened. Three years ago, when we were making the engine mount,
> we had assembled  the redrive to the engine. We'd mounted the flywheel and
> damper plate, probably finger tight,  at that time. For three years the
> engine had sat around with that damper plate in place hiding the loose
> bolts. When it finally came time to install the redrive properly I had
> forgotten that the flywheel had never been torqued down. It had been "part
> of the engine" for all that time, and I'd ASSumed that it had been correctly
> installed when the engine was built. I guess this is why we do taxi testing.
> 
> Today I'll pick up a new bolt from NAPA and a new bottle of locktite.
> 
> 

John, make sure you clean all the threads - male and female with acetone
before applying the locktite.