Message-ID: <40457297.6C8CBC94@frontiernet.net>
Date: Tue, 02 Mar 2004 23:52:23 -0600
From: Jim Sower <canarder@frontiernet.net>
MIME-Version: 1.0
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] ready to start?
References: <list-3060084@logan.com>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

Are you really really sure about that engine mount?  Seems shy a member or
two.  I can't see anything to keep it from swaying from side to side.

"sqpilot@earthlink" wrote:

> Hi, fellow rotary enthusiasts....Here are a couple of pictures of my 13b
> engine installation. I'm getting ready to start it and only run it for
> possibly 30 seconds and then check for leaks, etc.  I would appreciate any
> comments regarding anything that doesen't look right.  The alternator belt
> is not on in this picture, but it will be. Also, the oil cooler is
> temporarily bypassed just to see if it runs, then I'm taking the banjo
> fittings to the local hydraulic shop to have hoses crimped on.  I checked
> for spark, and it appears adequate. Thanks for any and all input.  Paul
> Conner
>
>   ----------------------------------------------------------------
>                    Name: IMAGE004.jpg
>    IMAGE004.jpg    Type: JPEG Image (image/jpeg)
>                Encoding: base64
>
>                    Name: IMAGE005.jpg
>    IMAGE005.jpg    Type: JPEG Image (image/jpeg)
>                Encoding: base64
>
>   ----------------------------------------------------------------
> >>  Homepage:  http://www.flyrotary.com/
> >>  Archive:   http://lancaironline.net/lists/flyrotary/List.html

--
Jim Sower ... Destiny's Plaything
Crossville, TN; Chapter 5
Long-EZ N83RT, Velocity N4095T