X-Virus-Scanned: clean according to Sophos on Logan.com From: "Jeff Whaley" Received: from hub026-nj-1.exch026.serverdata.net ([206.225.166.164] verified) by logan.com (CommuniGate Pro SMTP 6.0.10) with ESMTPS id 7233964 for flyrotary@lancaironline.net; Fri, 24 Oct 2014 09:30:10 -0400 Received-SPF: none receiver=logan.com; client-ip=206.225.166.164; envelope-from=jwhaley@datacast.com Received: from MBX026-E1-NJ-2.exch026.domain.local ([10.240.14.52]) by HUB026-NJ-1.exch026.domain.local ([10.240.14.30]) with mapi id 14.03.0174.001; Fri, 24 Oct 2014 06:29:33 -0700 To: Rotary motors in aircraft Subject: Re: [FlyRotary]: Inexpensive Coolant Hose Beading Idea Thread-Topic: [FlyRotary]: Inexpensive Coolant Hose Beading Idea Thread-Index: AQHP746LOQxwKlYNLUCCaDT9tsPCzw== Date: Fri, 24 Oct 2014 13:29:31 +0000 Message-ID: <234B758DE9A64449BEB6BB5D1345CA7A361EEC1E@mbx026-e1-nj-2.exch026.domain.local> References: In-Reply-To: Accept-Language: en-CA, en-US Content-Language: en-US X-MS-Has-Attach: X-MS-TNEF-Correlator: x-originating-ip: [209.87.232.162] Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 I've done this many times with copper ... not so easy with aluminum ... ma= ybe have use aluminum brazing rod. Jeff From: Subject: Inexpensive Coolant Hose Beading Idea Date: Thu, 23 Oct 2014 10:24:16 -0400 To: flyrotary@lancaironline.net Message Header Undecoded Message I once saw a simple way to add beading to a metal pipe on a car site once. = The guy cut a 3/16 in piece off the end of the pipe and used a tubing expa= nder to increase the diameter just enough so it would slip over the pipe, a= nd the then soldered it onto the pipe, and filed off any sharp spots, and "= wa-law", a homemade bead to resist the dreaded pressurized rubber hose pull= off... Doug This message, and the documents attached hereto, is intended only for the a= ddressee and may contain privileged or confidential information. Any unauth= orized disclosure is strictly prohibited. If you have received this message= in error, please notify us immediately so that we may correct our internal= records. Please then delete the original message. Thank you.