Pics to follow in multiple emails, due
to list size limits.
I bought most of my stuff from
http://www.siliconeintakes.com/
and
http://www.verociousmotorsports.com/
Also, check ebay for both mandrel bends and silicone bends. There
are several sites with pretty good prices.
Silicone Intakes' mandrel bends are much cheaper than their
silicone bends. For same-size couplers, you can just buy a length
of hose & cut it into couplers (see radiator input pic).
I had no luck bending thinwall AL tubing myself, even if I packed
the tubing with sand prior to bending & used a Harbor Freight
hydraulic pipe bender. However, if you can stand the loss of flow
area, AL electrical conduit is relatively easy to bend without
collapsing it (thicker walls).
Silicone hose seems to cost anywhere from $5 (1") to $20 per
foot. Tubing looks prettier, but a continuous run of silicone
hose isn't that much more expensive and it can get done in minutes
instead of weeks. Ask me how I know....
Charlie
On 10/21/2014 7:28 AM, Jeff Whaley wrote: