Return-Path: Received: from [24.25.9.100] (HELO ms-smtp-01-eri0.southeast.rr.com) by logan.com (CommuniGate Pro SMTP 4.1.8) with ESMTP id 3051569 for flyrotary@lancaironline.net; Sun, 29 Feb 2004 20:43:19 -0500 Received: from edward (clt78-020.carolina.rr.com [24.93.78.20]) by ms-smtp-01-eri0.southeast.rr.com (8.12.10/8.12.7) with SMTP id i211h8Sn022930 for ; Sun, 29 Feb 2004 20:43:09 -0500 (EST) Message-ID: <000d01c3ff2e$91c3e9a0$2402a8c0@edward> From: "Ed Anderson" To: "Rotary motors in aircraft" References: Subject: Weight of prototype was Re: EDDIE variable Intake photos Date: Sun, 29 Feb 2004 20:43:17 -0500 MIME-Version: 1.0 Content-Type: multipart/alternative; boundary="----=_NextPart_000_000A_01C3FF04.A8B23830" X-Priority: 3 X-MSMail-Priority: Normal X-Mailer: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 X-Virus-Scanned: Symantec AntiVirus Scan Engine This is a multi-part message in MIME format. ------=_NextPart_000_000A_01C3FF04.A8B23830 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Ok, Finn I just weighed the entire set up and it weighs 26 lbs, so my = estimate was off 1 lb. With more use of plastic I figure I can get it = down to around 13-14 lbs. Project for the next manifold (#6) is to see = how light weight I can make it. Ed Ed Anderson RV-6A N494BW Rotary Powered Matthews, NC ----- Original Message -----=20 From: Ed Anderson=20 To: Rotary motors in aircraft=20 Sent: Sunday, February 29, 2004 8:16 PM Subject: [FlyRotary] Re: EDDIE variable Intake photos I haven't weighed it yet,Finn, its going to be around 25 lbs due to my = use of the old "boat Anchor" lower slab aluminum manifold. However, if = the results are promising, the next version will be quite a bit lighter. = More use of plastic resin to lower weight, etc. Ed Anderson RV-6A N494BW Rotary Powered Matthews, NC ----- Original Message -----=20 From: Finn Lassen=20 To: Rotary motors in aircraft=20 Sent: Sunday, February 29, 2004 6:24 PM Subject: [FlyRotary] Re: EDDIE variable Intake photos Work of art, Ed!=20 You're putting the rest of us (well, at least me) to shame. Total weight? Finn Ed Anderson wrote: Well, folks, the unveiling is here. Here are the first photos of my variable length intake manifold = designed based on the EDDIE analysis. The primary and secondary of each = rotor are merged into one runner (1 3/4" dia). These two runners are = composed of 1.854 dia tube in which the 1.75" dia tubes slide. One set = for each rotor. There is a small DC 50 rpm motor (turns out this is a = bit slow) that turns a jack screw. This jack screw drives the throttle = body mount and the two 1.75" dia tubes and changes the length by 4" = which is a range of approx 1500 rpm. I wanted to get a 6-7" change, but = this is a prototype, so I used what I had laying around in terms of = manifold parts which put the whole setup 3-4" higher than I want. So = depending on OAT the 1500 rpm range could give me the EDDIE from 5000 - = 6500 rpm. There is a controller with limit switches at the upper and lower = extension to independently stop the motor when limits are reached. I = have a small potentiometer with a gear on its shaft. A rack is attached = to the throttle body which moves up and down with it. The teeth of the = rack turn the pot which of course changes the voltage which is indicated = on the control box by 10 Red LEDs. There is a dual color LED which is = Green when the throttle body is extending and is Red when it is = retracting. A few photos are attached. Hope to install it on the aircraft = tomorrow and within a day or two have it running. Ed Anderson RV-6A N494BW Rotary Powered Matthews, NC Archive: http://lancaironline.net/lists/flyrotary/List.html ------=_NextPart_000_000A_01C3FF04.A8B23830 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Ok, Finn
 
    I just weighed the = entire set up=20 and it weighs 26 lbs, so my estimate was off 1 lb.  With more use = of=20 plastic I figure I can get it down to around 13-14 lbs.  Project = for the=20 next manifold (#6) is to see how light weight I can make = it.
 
Ed
 
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From:=20 Ed=20 Anderson
Sent: Sunday, February 29, 2004 = 8:16=20 PM
Subject: [FlyRotary] Re: EDDIE = variable=20 Intake photos

I haven't weighed it = yet,Finn, its going to=20 be around 25 lbs due to my use of the old "boat Anchor" lower slab = aluminum=20 manifold.  However, if the results are promising, the next = version will=20 be quite a bit lighter.  More use of plastic resin to = lower=20 weight, etc.
 
Ed Anderson
RV-6A N494BW Rotary Powered
Matthews, NC
----- Original Message -----
From:=20 Finn=20 Lassen
To: Rotary motors in = aircraft=20
Sent: Sunday, February 29, = 2004 6:24=20 PM
Subject: [FlyRotary] Re: = EDDIE variable=20 Intake photos

Work of art, Ed!

You're putting the rest of = us (well,=20 at least me) to shame.

Total = weight?

Finn



Ed=20 Anderson wrote:
Well, folks, the unveiling is=20 here.
 
Here are the first photos of my = variable=20 length intake manifold designed based on the EDDIE analysis.  = The=20 primary and secondary of each rotor are merged into one runner (1 = 3/4"=20 dia).  These two runners are composed of 1.854 dia tube in = which the=20 1.75" dia tubes slide.  One set for each rotor.  There = is a=20 small DC 50 rpm motor (turns out this is a bit slow) that turns a = jack=20 screw.  This jack screw drives the throttle body mount and = the two=20 1.75" dia tubes and changes the length by 4" which is a range of = approx=20 1500 rpm.  I wanted to get a 6-7" change, but this is a = prototype, so=20 I used what I had laying around in terms of manifold parts which = put the=20 whole setup 3-4" higher than  I want.   = So depending on OAT the 1500 rpm range could = give me the=20 EDDIE from 5000 - 6500 rpm.
 
There is a controller with limit = switches at=20 the upper and lower extension to independently stop the motor when = limits=20 are reached.  I have a small potentiometer with a gear on its = shaft.  A rack is attached to the throttle body which moves = up and=20 down with it.  The teeth of the rack turn the pot which of = course=20 changes the voltage which is indicated on the control box by 10 = Red=20 LEDs.  There is a dual color LED which is Green when the = throttle=20 body is extending and is Red when it is retracting.
 
A few photos are attached.  = Hope to=20 install it on the aircraft tomorrow and within a day or two have = it=20 running.
 
 
Ed Anderson
RV-6A N494BW = Rotary=20 Powered
Matthews, NC

 Archive:   http://lancai=
ronline.net/lists/flyrotary/List.html
      =
------=_NextPart_000_000A_01C3FF04.A8B23830--