Glad to have you Charlie! -----Original Message----- From: Charlie England <ceengland7@gmail.com> To: Rotary motors in aircraft <flyrotary@lancaironline.net> Sent: Sun, Mar 23, 2014 9:11 am Subject: [FlyRotary] Re: Attention eTech, Arduino, PLC, Glass panel, 3D printers, tablet users On 3/23/2014 8:19 AM, cozygirrrl@aol.com wrote: Thank you to all who responded to our survey! It appears there are a lot of us out there using or are interested in some of the emerging technology out there and are applying it to their airplane projects. Randi and I are the Engines Workshop co-chairs at Sun N Fun and they have approved our plan to test the waters for an Emerging Technology Uses Group; eTUG. Time is short but we hope to have a demo 3D printer running in the workshop, at the very least we will have sample 3D prints from an ongoing project of ours and prototypes of the project as well as an Arduino project under development. If you are coming to Sun N Fun, please stop by the workshop and say hello. Tell us about your interests and projects, better yet, bring them along. We will have our first in-formal meeting on Friday, April 4th at 10:00am in the Engines Workshop tent. Its an opportunity to get together, talk with others about your projects and ideas and let us know what you'd like to see in the future. If you have a project you'd like to bring or do a presentation, please contact us. www.EmergingTechnologyUsers.com was launched yesterday! Even if you cannot make it to Sun N Fun or Oshkosh please go there and join in, tell us about your aviation related eTech projects. We are hoping to see this grow into a lively and interesting community of aviation eTech geeks. Please be patient, the forum will have it's glitches at first and until we get some moderators in place who can devote the time to help this all run smoothly. If you have suggestions for sub-forums and topics, please let us know. And finally, if you are on the Velocity list, Van's list or other aviation related list please forward this posting to help get the word out. Regards, Chrissi & Randi CG Products www.CozyGirrrl.com Sun N Fun Engine Workshop co-chairs Great idea; I just signed up. Thanks, Charlie
Thank you to all who responded to our survey! It appears there are a lot of us out there using or are interested in some of the emerging technology out there and are applying it to their airplane projects. Randi and I are the Engines Workshop co-chairs at Sun N Fun and they have approved our plan to test the waters for an Emerging Technology Uses Group; eTUG. Time is short but we hope to have a demo 3D printer running in the workshop, at the very least we will have sample 3D prints from an ongoing project of ours and prototypes of the project as well as an Arduino project under development. If you are coming to Sun N Fun, please stop by the workshop and say hello. Tell us about your interests and projects, better yet, bring them along. We will have our first in-formal meeting on Friday, April 4th at 10:00am in the Engines Workshop tent. Its an opportunity to get together, talk with others about your projects and ideas and let us know what you'd like to see in the future. If you have a project you'd like to bring or do a presentation, please contact us. www.EmergingTechnologyUsers.com was launched yesterday! Even if you cannot make it to Sun N Fun or Oshkosh please go there and join in, tell us about your aviation related eTech projects. We are hoping to see this grow into a lively and interesting community of aviation eTech geeks. Please be patient, the forum will have it's glitches at first and until we get some moderators in place who can devote the time to help this all run smoothly. If you have suggestions for sub-forums and topics, please let us know. And finally, if you are on the Velocity list, Van's list or other aviation related list please forward this posting to help get the word out. Regards, Chrissi & Randi CG Products www.CozyGirrrl.com Sun N Fun Engine Workshop co-chairs