Excellent! We're already gearing up for alt engine flyin; hope to see everyone in May. Charlie On 3/21/2014 10:05 AM, Tracy wrote: Hi Charlie, Latest version of installation guide was changed to all 22ga wire but 24ga is fine for everything except power, injector return and injector driver lines. Tracy Sent from my iPad On Mar 21, 2014, at 11:00, Charlie England <ceengland7@gmail.com> wrote: Q for Tracy: My EC-2 instructions specify 20AWG & 22AWG wire. Any reason to not use 24AWG wire on the low current (signal) lines? I've got a full roll of 24AWG, & with a 5A rating and short runs, it would seem to be fine for signal lines. My bundles will be smaller and I might even save an ounce. :-) Thanks, Charlie -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
Hi Charlie, Latest version of installation guide was changed to all 22ga wire but 24ga is fine for everything except power, injector return and injector driver lines. Tracy Sent from my iPad On Mar 21, 2014, at 11:00, Charlie England <ceengland7@gmail.com> wrote: Q for Tracy: My EC-2 instructions specify 20AWG & 22AWG wire. Any reason to not use 24AWG wire on the low current (signal) lines? I've got a full roll of 24AWG, & with a 5A rating and short runs, it would seem to be fine for signal lines. My bundles will be smaller and I might even save an ounce. :-) Thanks, Charlie -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html
On Mar 21, 2014, at 11:00, Charlie England <ceengland7@gmail.com> wrote: Q for Tracy: My EC-2 instructions specify 20AWG & 22AWG wire. Any reason to not use 24AWG wire on the low current (signal) lines? I've got a full roll of 24AWG, & with a 5A rating and short runs, it would seem to be fine for signal lines. My bundles will be smaller and I might even save an ounce. :-) Thanks, Charlie -- Homepage: http://www.flyrotary.com/ Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html