Received-SPF: pass
 receiver=logan.com; client-ip=209.85.216.169; envelope-from=ceengland7@gmail.com
Message-ID: <532C57A3.3020200@gmail.com>
Date: Fri, 21 Mar 2014 10:15:47 -0500
From: Charlie England <ceengland7@gmail.com>
User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.4.0
MIME-Version: 1.0
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Subject: Re: [FlyRotary] Re: EC2 wiring question
References: <list-6790385@logan.com>
In-Reply-To: <list-6790385@logan.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
Content-Transfer-Encoding: 7bit

Excellent!

We're already gearing up for alt engine flyin; hope to see everyone in May.

Charlie

On 3/21/2014 10:05 AM, Tracy wrote:
> Hi Charlie,
>     Latest version of installation guide was changed to all 22ga wire but 24ga is fine for everything except power,  injector return and injector driver lines.
>
> Tracy
>
> Sent from my iPad
>
>> On Mar 21, 2014, at 11:00, Charlie England <ceengland7@gmail.com> wrote:
>>
>> Q for Tracy:
>>
>> My EC-2 instructions specify 20AWG & 22AWG wire. Any reason to not use 24AWG wire on the low current (signal) lines? I've got a full roll of 24AWG, & with a 5A rating and short runs, it would seem to be fine for signal lines. My bundles will be smaller and I might even save an ounce. :-)
>>
>> Thanks,
>>
>> Charlie
>>
>> --
>> Homepage:  http://www.flyrotary.com/
>> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List.html