Received-SPF: pass
 receiver=logan.com; client-ip=209.85.213.45; envelope-from=rwstracy@gmail.com
Subject: Re: [FlyRotary] EC2 wiring question
References: <list-6790375@logan.com>
From: Tracy <rwstracy@gmail.com>
Content-Type: text/plain;
	charset=us-ascii
In-Reply-To: <list-6790375@logan.com>
Message-Id: <6E8FC9FF-D20B-45C9-B29A-73F59409A1EA@gmail.com>
Date: Fri, 21 Mar 2014 11:05:54 -0400
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
Content-Transfer-Encoding: quoted-printable
Mime-Version: 1.0 (1.0)

Hi Charlie,
   Latest version of installation guide was changed to all 22ga wire but 24g=
a is fine for everything except power,  injector return and injector driver l=
ines.

Tracy=20

Sent from my iPad

> On Mar 21, 2014, at 11:00, Charlie England <ceengland7@gmail.com> wrote:
>=20
> Q for Tracy:
>=20
> My EC-2 instructions specify 20AWG & 22AWG wire. Any reason to not use 24A=
WG wire on the low current (signal) lines? I've got a full roll of 24AWG, & w=
ith a 5A rating and short runs, it would seem to be fine for signal lines. M=
y bundles will be smaller and I might even save an ounce. :-)
>=20
> Thanks,
>=20
> Charlie
>=20
> --
> Homepage:  http://www.flyrotary.com/
> Archive and UnSub:   http://mail.lancaironline.net:81/lists/flyrotary/List=
.html