|
Richard, regarding the Ellison TB
I have a friend who tried an Ellison on his rotary - never
could get the low end and high end to work together. It appeared that (at
least for the size Ellison he was using) that the range of airflow quantity
below idle and WOT was outside the range of the size Ellison he was using.
If he got the idle set right, he ran out of fuel on the top end. If he got
the top end running right, the idle was too rich.
His engine eventually quit in flight, airframe was
destroyed - he fortunately escaped injury. Just thought I would pass it on
for what its worth.
Most O2 heater voltages are 12 -13 Volts - but, not
certain about the Renesis O2.
Sensor output for narrow band is generally from 0 -1
volt, Wide band from 0 -5 volts.
Ed
Sent: Tuesday, February 26, 2013 12:27 PM
Subject: [FlyRotary] Re: O2 Sensor data, Steve B.
I am planing to use an O2 sensor from a 2009 Renesis on my test engine.
Does anyone know what the heater supply is? I am measureing 2.4Ohm, cold.
Probably 5V? The connection is coming out of the ECU.
Would appreciate any info on that.
Still having issues with the mixture setting on the Rotec TBI (Ellison). No
real flying yet, just a lot of crow-hopping down the runway.
Richard
Sohn
N2071U
http://www.fairpoint.net/~res12/home.html
Sent: Tuesday, February 26, 2013 8:32 AM
Subject: [FlyRotary] Re: O2 Sensor data, Steve B.
Forgot to say,
under diog. for RX8 they call both sensors HO2 not AF. ???
David.
From: hoursaway1@comcast.net To: "Rotary motors in aircraft"
<flyrotary@lancaironline.net> Sent: Tuesday, February 26, 2013
9:29:12 AM Subject: [FlyRotary] O2 Sensor data, Steve B.
Steve, another
update on O2 sensor data,,, for a 2007 RX8 frnt. HO2 sensor is read in mil.
Amps,,, 1.0 mil. amp is center point under accell is looking for decrease,
under deccell looking for increase, did not give min.-max. for the high
& low that I think could have been useful. David.
From: "Steven W. Boese" <SBoese@uwyo.edu> To: "Rotary
motors in aircraft" <flyrotary@lancaironline.net> Sent: Monday,
February 11, 2013 9:50:49 PM Subject: [FlyRotary] Re: Crickets &
progress
David,
Do you remember ballpark values for the amps and volts?
Thanks,
Steve
From: Rotary motors in aircraft [flyrotary@lancaironline.net]
on behalf of hoursaway1@comcast.net [hoursaway1@comcast.net]
Sent:
Monday, February 11, 2013 7:19 PM
To: Rotary motors in
aircraft
Subject: [FlyRotary] Re: Crickets &
progress
Steve, I'm not
sure why but when diog. the other day on 07 Mazda 3 for a code P2188,
Snap-on scanner shows me amps for pre cat. AF sensor & volts for post cat.
O2 sensor & that is how they describe them in Mitchel Automotive diog.
text. Hope this helps in some way. David R. Cook RV6A
Rotary.
--
Homepage: http://www.flyrotary.com/
Archive and
UnSub:
http://mail.lancaironline.net:81/lists/flyrotary/List.html
No virus found in this
message.
Checked by AVG - www.avg.com
Version: 2013.0.2899 / Virus
Database: 2641/6130 - Release Date: 02/25/13
|