Return-Path: Received: from [65.54.169.61] (HELO hotmail.com) by logan.com (CommuniGate Pro SMTP 4.1.8) with ESMTP id 2997654 for flyrotary@lancaironline.net; Wed, 18 Feb 2004 15:37:08 -0500 Received: from mail pickup service by hotmail.com with Microsoft SMTPSVC; Wed, 18 Feb 2004 12:37:07 -0800 Received: from 67.24.247.233 by bay3-dav31.bay3.hotmail.com with DAV; Wed, 18 Feb 2004 20:37:07 +0000 X-Originating-IP: [67.24.247.233] X-Originating-Email: [lors01@msn.com] X-Sender: lors01@msn.com From: "Tracy Crook" To: "Rotary motors in aircraft" Subject: Re: [FlyRotary] Stock Oil Pickup Date: Wed, 18 Feb 2004 15:37:05 -0500 MIME-Version: 1.0 X-Mailer: MSN Explorer 7.02.0011.2700 Content-Type: multipart/alternative; boundary="----=_NextPart_001_0002_01C3F635.1001AA30" Message-ID: X-OriginalArrivalTime: 18 Feb 2004 20:37:07.0797 (UTC) FILETIME=[F9FCF850:01C3F65E] ------=_NextPart_001_0002_01C3F635.1001AA30 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Racing Beat sells an anti-foaming plate but it's just a thin sheet of alu= minum with holes in the necessary places that you could easily make yours= elf. Tracy ----- Original Message ----- From: Scott Stout Sent: Wednesday, February 18, 2004 2:01 PM To: Rotary motors in aircraft Subject: [FlyRotary] Stock Oil Pickup If the stock oil pan is used, is there a reason not to use the stock oil =20 pickup? =20 Also, I had read in Tracy's papers about the need to slow down the =20 return of the oil to the pan to reduce the amount of frothing( this was =20 accomplished by the oil pan sandwich plate mounting method ). Are the =20 anti-frothing methods still believed to be needed? If so, if the oil =20 pan sandwich plate mounting method is not being used, any suggestions? Thanx... -Scott Many thanx to those who helped with the pressure on a column of water... >> Homepage: http://www.flyrotary.com/ >> Archive: http://lancaironline.net/lists/flyrotary/List.html ------=_NextPart_001_0002_01C3F635.1001AA30 Content-Type: text/html; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable
Racing Beat se= lls an anti-foaming plate but it's just a thin sheet of aluminum with hol= es in the necessary places that you could easily make yourself.
 
Tracy
 
----- O= riginal Message -----
From: Scott Stout
Sent: Wednesday, February 18, 2004 2:01 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Stock Oil Pickup=
 
If the stock oil pan is used, is there a reason n= ot to use the stock oil
pickup?

Also, I had read in Tracy's p= apers about the need to slow down the
return of the oil to the pan to= reduce the amount of frothing( this was
accomplished by the oil pan = sandwich plate mounting method ).  Are the
anti-frothing methods= still believed to be needed?  If so, if the oil
pan sandwich pl= ate mounting method is not being used, any suggestions?

Thanx...-Scott

Many thanx to those who helped with the pressure on a col= umn of water...

>>  Homepage:  http://www.flyrotar= y.com/
>>  Archive:   http://lancaironline.net/li= sts/flyrotary/List.html
------=_NextPart_001_0002_01C3F635.1001AA30--