Mailing List flyrotary@lancaironline.net Message #59178
From: Richard Sohn <res12@fairpoint.net>
Subject: Re: [FlyRotary] Re: Mixture
Date: Fri, 2 Nov 2012 15:10:20 -0500
To: Rotary motors in aircraft <flyrotary@lancaironline.net>
 Message Header

Undecoded Message
Bill,
 
after cleaning the rotor housing and looking at it again I think the drill and tap can be done.
 
Thanks
 
Richard
 
Sent: Friday, November 02, 2012 2:26 PM
Subject: [FlyRotary] Re: Mixture
 
Neither one has straight access, unfortunately.
 
Richard
 
Sent: Friday, November 02, 2012 2:08 PM
Subject: [FlyRotary] Re: Mixture
 

Can you drill and tap them?

 

Bill B

 

From: Rotary motors in aircraft [mailto:flyrotary@lancaironline.net] On Behalf Of Richard Sohn
Sent: Friday, November 02, 2012 2:58 PM
To: Rotary motors in aircraft
Subject: [FlyRotary] Mixture

 

Took the engine apart and found the previously mentioned holes in the exhaust port wide open into the oil pan. Now I have to find a good way to close them. Anyone having a good idea?

 

 

Richard Sohn
N2071U

http://www.fairpoint.net/~res12/home.html

Subscribe (FEED) Subscribe (DIGEST) Subscribe (INDEX) Unsubscribe Mail to Listmaster