flyrotary@lancaironline.net Mailing List Archive

Ha ha ha. Excellent suggestion. With my planned Trek theme, perhaps a phaser cannon. ;-) Sent from my iPhone 4 On Aug 19, 2012, at 10:31 AM, "Ed Anderson" <eanderson@carolina.rr.com> wrote: > I don't suppose you could shorten that end of your oil cooler mount and raise it up - nah, probably would mess up your ducting to the oil cooler. > > Just make the bump sexier - like paint what would appear to be a cannon barrel firing port on it{:>) > > Ed > > -------------------------------------------------- > From: "Chris Barber" <cbarber@texasattorney.net> > Sent: Sunday, August 19, 2012 10:22 AM > To: "Rotary motors in aircraft" <flyrotary@lancaironline.net> > Subject: [FlyRotary] Re: Standard oil cooler port. > >> I am gonna leave it be. My cooling went from terrible to cant really ask for much better (even if I hope to be able to decrease the size of my big 'ol ugly scoop as I progress). Adding a protective blister/fairing is not too big a deal, just would have preferred "better" plumping routes >> >> Thanks. >> >> Chris >> >> Sent from my iPhone 4 >> >> On Aug 19, 2012, at 6:31 AM, "Ed Anderson" <eanderson@carolina.rr.com> wrote: >> >>> If you just remove the oil thermostat in the stock Mazda oil cooler - you will seriously impair your oil cooling ability. The removal will permit major oil flow directly from input port to output port without going through the cooling coils of the oil cooler. >>> >>> It is likely that you could block the cross feed hole - and remove the thermostat, but I suspect it won't be easy. >>> >>> Looking at the diagram in the RX-7 manual, it appears that if you could find a threaded plug (undoubtedly metric threads with an hex socket head for inserting Allen wrench and tightening) that would screw up into the thermostat hole - you could block the oil cross feed. Then you would, of course need to block the normal outlet port and find an oil fitting that will screw into the hole where the large plug now exists. I've never looked but I suspect you may have trouble finding such. >>> >>> Good luck >>> >>> Ed >>> >>> -------------------------------------------------- >>> From: "Bobby J. Hughes" <bhughes@qnsi.net> >>> Sent: Saturday, August 18, 2012 10:17 PM >>> To: "Rotary motors in aircraft" <flyrotary@lancaironline.net> >>> Subject: [FlyRotary] Re: Standard oil cooler port. >>> >>>> Chris >>>> >>>> I think the thermostat hole can be plugged but I don't know the details. >>>> >>>> Bobby Hughes >>>> >>>> >>>> >>> >>> >>> >>>> >>>> Sent from my iPad >>>> >>>> On Aug 18, 2012, at 6:57 PM, "Chris Barber" <cbarber@texasattorney.net> wrote: >>>> >>>>> On the standard Mazda oil cooler there is a port next to and 90 degrees off from the port on the end of the cooler. What is this port for? There is a large hex topped bolt in the hole. >>>>> >>>>> Could I use this location to run a line to instead of the one on the end? It would greatly clean up a plumbing issue I have as currently my the port on the end protrudes out of my cowl slightly. If I can use this other port I could likely eliminate adding a blister. >>>>> >>>>> Thanks. >>>>> >>>>> Chris >>>>> 2nd gen 13b >>>>> 1.6 hrs As of yesterday. Flight five. >>>>> >>>>> Sent from my iPhone 4 >>>>> -- >>>>> Homepage: http://www.flyrotary.com/ >>>>> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >>>> >>> >>> >>> >>>> -- >>>> Homepage: http://www.flyrotary.com/ >>>> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >>>> >>> >>> >>> >>>> ----- >>>> No virus found in this message. >>>> Checked by AVG - www.avg.com >>>> Version: 2012.0.2197 / Virus Database: 2437/5208 - Release Date: 08/18/12 >>> >>> >>> -- >>> Homepage: http://www.flyrotary.com/ >>> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >> >> -- >> Homepage: http://www.flyrotary.com/ >> Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html >> >> >> ----- >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2012.0.2197 / Virus Database: 2437/5209 - Release Date: 08/19/12 >> > > -- > Homepage: http://www.flyrotary.com/ > Archive and UnSub: http://mail.lancaironline.net:81/lists/flyrotary/List.html